MGate 5114-T - 1-port Modbus/IEC101 to IEC104 gateway, -40 to 75 Degree C operating temperature
by MOXA

The MGate 5114-T is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 network communications. By integrating commonly used power protocols, the MGate 5114 provides the flexibility needed to fulfill the various conditions that arise with field devices that use different communications protocols to connect to a power SCADA system. To integrate Modbus or IEC 60870-5-101 devices onto an IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems.

Easy Configuration via Web Console

The MGate 5114 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps.

Modbus RTU/ASCII/TCP Protocol Traffic Monitor

MGate 5114 Series gateways support Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. It is worth mentioning that traffic logs can be viewed in the popular troubleshooting tool, Wireshark. With this feature, you can easily analyze traffic to determine the root cause of a problem.

Maintenance Functions

MGate 5114 gateways support a system log function that records events in the MGate; users can easily review log data remotely through the web console. The gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PSCADA system when a device gets disconnected or does not respond, in which case the PSCADA system gets the status of each end device and then issues alarms to notify operators.

Ethernet Interface

• 10/100BaseT(X) Ports (RJ45 connector)

  2
  Auto MDI/MDI-X connection

• Magnetic Isolation Protection

  1.5 kV (built-in)

Ethernet Software Features

• Industrial Protocols

  Modbus TCP Client (Master), Modbus TCP Server (Slave), IEC 60870-5-104 Client (Master), IEC 60870-5-104 Server (Slave)

• Configuration Options

  Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console

• Management

  ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client

• MIB

  RFC1213, RFC1317

• Time Management

  NTP Client

Serial Interface

• Console Port

  RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

• No. of Ports

  1

• Connector

  DB9 male

• Serial Standards

  RS-232/422/485

• Baudrate

  50 bps to 921.6 kbps

• Data Bits

  7, 8

• Parity

  Even, Mark, None, Odd, Space

• Stop Bits

  1, 2

• Flow Control

  RTS Toggle (RS-232 only), RTS/CTS

• RS-485 Data Direction Control

  ADDC® (automatic data direction control)

• Pull High/Low Resistor for RS-485

  1 kilo-ohm, 150 kilo-ohms

• Terminator for RS-485

  120 ohms

• Isolation

  2 kV (built-in)

Serial Signals

• RS-232

  TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

• RS-422

  Tx+, Tx-, Rx+, Rx-, GND

• RS-485-2w

  Data+, Data-, GND

• RS-485-4w

  Tx+, Tx-, Rx+, Rx-, GND

Serial Software Features

• Industrial Protocols

  Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave, IEC 60870-5-101 Master (Balanced/Unbalanced), IEC 60870-5-101 Slave (Balanced/Unbalanced)

• Configuration Options

  Serial Console

Modbus RTU/ASCII

• Mode

  Master, Slave

• Functions Supported

  1, 2, 3, 4, 5, 6, 15, 16, 23

• Max. No. of Commands

  128

Modbus TCP

• Mode

  Client, Server

• Functions Supported

  1, 2, 3, 4, 5, 6, 15, 16, 23

• Max. No. of Client Connections

  32

• Max. No. of Server Connections

  32

• Max. No. of Commands

  128

IEC 60870-5-104

• Mode

  Client (Master)
  Server (Slave)

• Max. No. of Client Connections

  32

• Max. No. of Server Connections

  32

• Max. No. of Information Objects

  2000 points

IEC 60870-5-101

• Mode

  Master (Balanced/Unbalanced)
  Slave (Balanced/Unbalanced)

• Max. No. of Master Connections

  1

• Max. No. of Slave Connections

  1 (Balanced), 31 (Unbalanced)

• Max. No. of Information Objects

  2000 points

Memory

• microSD Slot

  Up to 32 GB (SD 2.0 compatible)

Power Parameters

• Input Voltage

  12 to 48 VDC

• Input Current

  455 mA @ 12 VDC

• Power Connector

  Screw-fastened Euroblock terminal

Relays

• Contact Current Rating

  Resistive load: 2 A @ 30 VDC

Physical Characteristics

• Housing

  Metal

• IP Rating

  IP30

• Dimensions

  36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)

• Weight

  507 g (1.12 lb)

Environmental Limits

• Storage Temperature (package included)

  -40 to 85°C (-40 to 185°F)

• Ambient Relative Humidity

  5 to 95% (non-condensing)

• Operating Temperature

  MGate 5114: 0 to 60°C (32 to 140°F)
  MGate 5114-T: -40 to 75°C (-40 to 167°F)

Standards and Certifications

• Safety

  EN 60950-1, UL 508

• EMC

  EN 55032/24

• EMI

  CISPR 32, FCC Part 15B Class B

• EMS

  IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
  IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
  IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
  IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
  IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
  IEC 61000-4-8 PFMF

• Hazardous Locations

  ATEX, Class I Division 2, IECEx Class 1 Division 2, ATEX, and IECEx certifications are underway. Please contact a Moxa sales representative for details.

• Freefall

  IEC 60068-2-32

• Shock

  IEC 60068-2-27

• Vibration

  IEC 60068-2-6, IEC 60068-2-64

MTBF

• Time

  1,140,815 hrs

• Standards

  Telcordia SR332

MGate 5114-T.pdf

973 K