ADAM-4060-DE The ADAM-4000 series is a set of intelligent sensor-to-computer interface analog I/O modules containing a built-in microprocessor. They are remotely controlled through a simple set of commands issued in ASCII format and transmitted in RS-485 protocol.The 4000 series provide signal conditioning, isolation, ranging, A/D and D/A conversion, data comparison, and digital communication functions. Some modules provide digital I/O lines for controlling relays and TTL devices.Buy and compare our RS-485 I/O modules below. Click on each model number to view a photo and see the Details, Specs, Documentation, and Accessories tabs for further information.
Relay Output
- Channels: 4-channels relay, two Form A and two Form C
- Contact Rating: AC: 125 V @ 0.6 A; 250 V @ 0.3 A DC: 30 V @ 2 A; 110 V @ 0.6 A
- Breakdown Voltage: 500 VAC (50/60 Hz)
- Relay on Time (typical): 3 msec.
- Relay off Time (typical): 1 msec.
- Total Switching Time: 10 msec.
- Insulation Resistance: 1,000 MΩ minimum at 500 VDC
Built-in Watchdog Timer Power
- Power Requirements Unregulated: +10 ~ +30 VDC
- Power Consumption: 0.8 W @ 24 VDC
