Need assistance or guidance?

Contact us @: 1-800-301-9097

Login / Register Contact Us
IMC-B111ETB - DIN Rail 2-wire 10/100TX (Terminal Block) Ethernet extender by ORing Industrial Networking

IMC-B111ETB - DIN Rail 2-wire 10/100TX (Terminal Block) Ethernet extender
by ORing Industrial Networking

Write a review Write a review
  • Extend Ethernet distance up to 300m (984 feet) over UTP cable or up to 200m (656 feet) over 24AWG none-UTP cable
  • Supports 2-wired transmission
  • Provided DIP-Switch to selecting Auto/Manual mode for Master/Slave setting
  • Supports Auto mode to auto-negotiation for master/slave mode switching
  • Ethernet port support full/half duplex operation
  • Ethernet port support Auto MDI/MDI-X switching function
  • Redundant 12~48VDC power inputs with Terminal Block
  • Rigid IP-30 mini-type housing design
  • DIN-Rail and wall mounting enabled

IMC-B111ETB-TB is a cost-effective solution for extending an Ethernet connection beyond its inherent distance limitation. IMC-B111ETB-TB can extend the distance to 300 meters using a UTP cable or 200meters using a 24AWG cable. IMC-B111ETB-TB supports 2-wired transmission. IMC-B111ETB-TB provides a wide operating temperature range from -40~75oC, making it suitable for harsh operating environments.

Physical Ports  
100Base-TX Port in RJ45 Auto MDI/MDIX 1
100Mbps Ethernet Extender Ports in Terminal Block 1 (support 2-wired)
Ethernet Standards IEEE 802.3u for 100Base-TX
Processing Store-and-Forward
LED Indicators  
Power indicator Green : Power LED x 2
10/100Base-T(X) RJ45 port indicator Green LED for Link indicator.    Amber LED for Ack indicator
Ethernet Extender Indicator Green LED for Link indicator.    Amber LED for Ack indicator.
DIP-Switch Setting DIP-switch 1 for master/slave mode select : (On) Master mode, (Off) slave mode
DIP-switch 2 for Auto/Manual mode select : 
(On) Manual mode ~ Extender need to manual setting master mode or slave mode follow the DIP-switch 1 setting 
(Off) Auto mode ~ Extender will be auto negotiation and auto setting master or slave mode
Input power Dual 12 ~ 48VDC power inputs.
Power consumption (Typ.) 2 Watts
Overload current protection Present
Physical Characteristics  
Enclosure IP-30
Dimension (W x D x H) 26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)
Weight (g) 240 g
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 75oC (-40 to 167oF)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Copyright © 2023 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.