|
|
PSVHP-65-1200 - 65V 1000W Open Frame Power Supply : 120VAC, 240VAC input, 65V 18A Output by Tycon Systems
|
|
|
- High Power and rugged design
- Short Circuit , Over-Voltage, Over-current Protection
- 115VAC or 230VAC Wire Terminal Input
- 65VDC 18A Threaded Stud Output
- -40C to +60C Operating Temperature
|
|
|
The PSVHP-65-1200 high power switching power supplies have an impressive output capacity up to 1200W. They can run on 115VAC or 230VAC (selectable) single phase AC power. The output is 65VDC @ up to 18A. The units are designed to operate outdoors in a weatherproof enclosure. They have conformal coated circuits to protect against moisture and are capable of -40C to +60C operating temperature. The units can be wall mounted using existing holes in the housing or DIN rail mounted using an optional DIN Rail bracket.
|
PSVHP-65-1200HP-65-1200 |
Input Operating Range |
115VAC (90-130VAC) or 220VAC (210-265VAC) (selectable) ; 47-63Hz |
Input In-rush Current |
60A Max |
Input Current |
12A @ 115VAC ; 6A @ 220VAC Max |
Output Voltage |
65 VDC +/-5% |
Cont. Load Current |
18A |
Ripple / Noise |
1% / 5% |
Efficiency |
90% Minimum |
Dielectric Strength |
1800V rms / 50Hz, 1 sec, 10mA Max |
Protection |
Short Circuit, Over-Voltage, Over-Current, Over Temperature |
Safety Standards |
UL 60950-1, CUL 22.2 No.60950-1-03, TUV EN60950-1 |
EMI Standards |
FCC PART 15 CLASS B, EN55022 CLASS B, CISPR 22 CLASS B |
Operating Temp |
-40°C to 60°C (-40°F to 140°F) |
Operating Humidity |
5% to 90% non- condensing |
Storage Temp |
-40°C to 85°C (-40°F to 185°F) |
Case Size |
255 x 140 x 79mm (10 x 5.5 x 3.1”) |
|
|