|
|
TS-328-US - TS-328-US - 3 bay NAS, Realtek 1296 Quad core 1.4GHz, 2GB DDR4 RAM on board, 2 x GbE, US Edition by QNAP
|
|
|
- With just three disks you can build a secure RAID 5 array on the TS-328. This provides optimized storage capacity and protection against one disk failing.
- Supports H.264 hardware decoding and transcoding, providing a smoother video viewing experience.
- Snapshots fully record system status and data (including metadata). If files are accidentally deleted or modified, you can quickly restore the data with snapshots.
- Hot-swapping design allows you to remove hard drives without powering off the NAS to ensure continuous operations.
- Hybrid Backup Sync consolidates backup and sync tasks to a single app; Qsync is an easy-to-use real-time file sync service for computers and mobile devices.
- Take photos or record videos using Qphoto on your mobile device and they will be automatically uploaded to the TS-328.
|
|
|
30% of QNAP users choose to build RAID 5 array for their NAS for higher data protection, better system performance and more available storage space. The TS-328-US is QNAP’s first 3-bay NAS, allowing you to build a RAID 5 array on your NAS with the fewest disks. Powered by a Realtek quad-core RTD1296 processor, the TS-328 features a minimalist design that easily fits into your home or commercial space. With a variety of multimedia applications, transcoding capabilities and cross-device file backup and synchronization, the TS-328 provides a highly cost-effective solution for storage, backup, file management, and sharing.
TS-328-US
CPU |
Realtek RTD 1296 ARM® Cortex-A53 quad-core 1.4 GHz processor Note: The TS-328 reserves some RAM for use as shared graphics
memory. |
CPU Architecture |
64-bit ARM |
Floating Point Unit |
|
Encryption Engine |
|
Hardware-accelerated Transcoding |
, up to 1080P |
System Memory |
2 GB DDR4 RAM, not expandable |
Maximum Memory |
2 GB DDR4 RAM, not expandable |
Flash Memory |
4 GB (Dual boot OS protection) |
Drive Bay |
3 x 3.5-inch SATA 6Gb/s, 3Gb/s bundled one 2.5" tray base for installing 2.5" HDD/SSD; additional purchase can be made from QNAP shop |
Drive Compatibility |
3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives A 2.5" drive tray base is needed to install a 2.5" SSD/HDD |
Hot-swappable |
|
Gigabit Ethernet Port (RJ45) |
2 Note: You can set the MTU of LAN 1 up to 1500 while the MTU of LAN 2 can be set up to 9000. |
Jumbo Frame |
|
USB 2.0 port |
1 |
USB 3.2 Gen 1 port |
2 |
Audio Output |
1 x built-in speaker, 1 x 3.5mm line out jack (for amplifiers or speakers) You cannot use the speakers and the line-out jack simultaneously. |
Form Factor |
Tower |
LED Indicators |
System Status, LAN, USB, HDD1~3 |
Buttons |
Power, Reset, USB Copy |
Dimensions (HxWxD) |
142 × 150 × 260.1 mm |
Weight (Net) |
1.64 kg |
Weight (Gross) |
2.69 kg |
Operating temperature |
0 - 40 °C (32°F - 104°F) |
Relative Humidity |
5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
Power Supply Unit |
External, 65 W, AC 100 to 240 V |
Power Consumption: HDD Sleep Mode |
7.24 W |
Power Consumption: Operating Mode, Typical |
18.35 W Tested with drives fully populated. |
Fan |
1 x 90mm, 12VDC |
Sound Level |
16.5 db(A) |
Other Interfaces |
Kensington security slot |
System Warning |
Voice prompts or Buzzer |
Kensington Security Slot |
|
Max. Number of Concurrent Connections (CIFS) |
128 |
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front of operating NAS.
Designs and specifications are subject to change without notice.
|
|