|
|
- Supports serial data transfer rates to 230.4 kbps
- Built-in 16C950 compatible UART
- 128-bype deep transmit/receive FIFOs
- Compliant with PCI Express Base Specification 1.0a
- Compliant with PCI Express Base Specification 1.1
- Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys
- Supports 2 x UART serial ports
- Built-in 16C950 compatible UART
- 128-bype deep transmit/receive FIFOs
- Data transfer rate up to 230400bps
- Optional RS-232 signal or power output to serial device
- Provides 5VDC or 12VDC power output via pin 1/4/8/9
- 15DV ESD protection on all signal pins
- Plug-n-Play, I/O address and IRQ assigned by BIOS
- Support Windows XP/Vista/7, Linux
|
|
|
The DSLP-PCIE-100 is an RS-232 serial PCI Express Card. It meets PCI Express Base Specifications V1.1. It can be installed in virtually any available PC system and is compatible with all major operating systems. Users do not set jumpers to configure I/O addresses and IRQ locations. This board also supports 5VDC or 12VDC of power from each serial port pin 1, 4, 8 or 9. This can be configured via jumpers on the board. If this power is not required, then normal control signals are available. The default configuration is with the jumpers set to disable the power on these pins.
- Compliant with PCI Express Base Specification 1.1
- Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus Connector keys
- Supports 2 x UART serial ports
- Built-in 16C950 compatible UART
- 128-bype deep transmit/receive FIFOs
- Data Transfer rate up to 230400bps
- Optional RS-232 signal or power output to serial device
- Provides 5VDC or 12VDC power output via pin 1/4/8/9
- 15DV ESD protection on all signal pins
- Plug-n-Play, I/O address and IRQ assigned by BIOS
- Support Windows XP/Vista/7, Linux
DSLP-PCIE-100 |
|
Features: |
Compliant with PCI Express Base Specifications 1.0a
Data Transfer rate up to 115200bps |
Interface: |
RS-232 |
OS Compatibility: |
Windows 2000/XP/Server 2003/Vista/7 |
Connectors: |
2 DB-9 serial fan out cable, requires only one PC bracket slot |
Machine Compatibility: |
Low Profile systems, standard height configuration with low profile orb installed |
Bus: |
PCI-Express X1 |
QSLP-PCIE-100 |
|
Features: |
Compliant with PCI Express Base Specification 1.0a
Built-in 16C550 compatible UART with 256-byte transmit-receive FIFO
Data transfer rate up to 115200bps
|
Interface: |
RS-232 |
OS Compatibility: |
Windows 2000/XP/Server 2003/Vista/7 |
Connectors: |
4 DB-9 serial fan out cable, requires only one PC bracket slot |
Machine Compatibility: |
Low Profile systems, standard height configuration with low profile orb installed. Full height orb included. |
Bus: |
PCI-Express X1 |
|
|