|
|
|
XV306 - 4 Analog Input and 4 Digital / Counter Input and 4 Form A Relay Output
by ICP DAS
|
|
|
|
Multifunction Expansion I/O Board for VPD Controllers with 4 Analog Inputs, 4 Digital / Counter Inputs and 4 Form A Relay Outputs
|
|
|
The XV306 is a multifunction expansion board that includes 4 Analog Input channels, 4 Digital Input channels and 4 Form A Relay Output channels. It provides a programmable input range on all Analog Input channels (+/-1 V, +/-2.5 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ +20 mA or +4 ~ +20 mA), and voltage and current outputs are jumper selectable. The Digital Input channels can be used as 32-bit counters. The XV306 also provides options for configuring power-on values for the Digital Output. 4 kV ESD protection and 2000 VDC intra-module isolation are also provided to enhance noise immunity capabilities in industrial environments.
- Multifunction (4 AI, 4 DI, 4 Relay)
- Individual Channel Configuration
- Jumper Selectable Voltage or Current Input/Output
- Digital Input Channels can be used as 32-bit Counters
- Open Wire Detection for Current Output
- Configurable Power-on Value Settings
- 120 VDC Overvoltage Protection for Analog Input
- 70 VDC Overvoltage Protection for Digital Input
Communication |
Interface |
RS-232/TTL |
Format |
N, 8, 1 |
Baud Rate |
115200 bps |
Protocol |
Modbus/RTU |
Isolation |
Intra-module Isolation, Field-to-Logic |
2000 VDC |
EMS Protection |
ESD (IEC 61000-4-2) |
±4 kV Contact For Each Terminal, ±8 kV Air For Random Terminal |
Power |
Powered from Terminal Block |
5 VBC |
Consumption |
1.6 W Max. |
Mechanical |
Dimensions (W x L x H) |
82 mm x 59 mm x 13 mm |
Environment |
Operating Temperature |
-25 ~ +75°C |
Storage Temperature |
-30 ~ +80°C |
Humidity |
10 ~ 90% RH, Non-condensing |
Analog Input |
Channels |
4 |
Type |
±1 V, ±2.5 V, ±5 V, ±10 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable) |
Resolution |
16-bit |
Sampling Rate |
Normal Mode, 10Hz |
Sampling Rate |
Fast Mode, 200Hz |
Sampling Rate |
Normal Mode, ±0.1 % |
Sampling Rate |
Fast Mode, ±0.5 % |
Overvoltage Protection |
47 VDC |
Digital Input/Counter |
Input Channels |
4 |
Type |
Dry Contact - , Wet Contact - Sink/Source |
ON Voltage Level |
Yes |
Power-on Value |
Yes, Programmable |
Relay Output |
Channels |
4 |
Type |
Power Relay |
Form A Relay, Contact Rating, |
6 A @ 35 VDC 6 A @ 240 VAC |
Form A Relay, Contact Rating |
10 ~ 40 VDC |
Form A Relay, Min. Contact Load |
100 mA @ ≧12 V |
Form A Relay,Contact Material |
Silver Cadmium Alloy |
Form A Relay,Operate Time |
5 ms (typical) |
Form A Relay, Release Time |
1 ms (typical) |
Form A Relay, Mechanical Endurance, |
30 x 106 ops. |
Form A Relay, Electrical Endurance |
1 x 105 ops. |
Power On Value |
Yes |
|
|
