The UC-8410A-NW-T-LX embedded computers support a rich collection of communication interfaces, including 8 RS-232/422/485 serial ports, 3 Ethernet ports, 1 PCIe mini slot for a wireless module, 4 digital input channels, 4 digital output channels, 1 mSATA slot, and 2 USB 2.0 hosts.
The UC-8410A computer uses the Freescale Cortex-A7 dual-core 1 GHz RISC CPU. This powerful computing engine supports several useful communications functions, without generating too much heat. The built-in 8 GB eMMC card and 1 GB DDR3 SDRAM give you enough memory to run your application software, and the mSATA slot provides the flexibility of adding additional data storage.
The UC-8410A computers come with a variety of communication interfaces, including serial ports, Ethernet ports, wireless communication slot, and digital input/output channels, making them ideal as communication platforms for industrial applications that require network and device communications.
The UC-8410A Series comes with Linux Debian 8 preinstalled to provide an open software operating system for software program development. This makes the UC-8410A computer an optimal solution for use with industrial applications, but at minimal cost and effort. In addition to the standard model of the UC-8410A, a -40 to 75°C wide-temperature model is available for harsh industrial environments.
Appearance
Front View
Rear View
Computer
CPU
Armv7 Cortex-A7 dual-core 1 GHz
System Memory Pre-installed
1 GB DDR3L
Supported OS
Linux Debian 8 (Linux kernel v4.1)
Storage Pre-installed
8 GB eMMC
Computer Interface
Ethernet Ports
Auto-sensing 10/100/1000 Mbps ports (RJ45 connector) x 3
USB 2.0
USB 2.0 hosts x 2, type-A connectors
Digital Input
DIs x 4
Digital Output
DOs x 4
Expansion Slots
UC-8410A-LX Series: 1
Cellular Antenna Connector
UC-8410A-LX Series: 2
Number of SIMs
UC-8410A-LX Series: 1
SIM Format
UC-8410A-LX Series: Mini
Console Port
1 x 4-pin header to DB9 console port
Serial Ports
RS-232/422/485 ports x 8, software-selectable (RJ45)
Digital Inputs
Channel-to-Channel Isolation
3000 VDC
Connector
Screw-fastened Euroblock terminal
Dry Contact
On: short to GND
Off: open
Sensor Type
Dry contact
Wet Contact (NPN or PNP)
Wet Contact (DI to COM)
On: 10 to 30 VDC
Off: 0 to 3 VDC
Digital Outputs
Connector
Screw-fastened Euroblock terminal
Current Rating
200 mA per channel
I/O Type
Sink
Voltage
Open-drain to 30 VDC
LED Indicators
System
Power x 1
System Ready x 1
Storage x 1
Programmable x 10
LAN
2 per port (10/100/1000 Mbps)
Serial
2 per port (Tx, Rx)
Serial Interface
Baudrate
50 bps to 115.2 kbps
Flow Control
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485, RTS Toggle (RS-232 only)
Isolation
N/A
Parity
None, Even, Odd, Space, Mark
Stop Bits
1, 1.5, 2
Serial Signals
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
Power Parameters
Input Voltage
12 to 48 VDC
Power Connector
Terminal block (for DC models)
Power Consumption
19 W (max.)
Physical Characteristics
Housing
Metal
IP Rating
IP30
Dimensions
200 x 120 x 48.6 mm (7.87 x 4.72 x 1.91 in)
Weight
1,000 g (2.21 lb)
Installation
Wall mounting (standard)
Environmental Limits
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
Standard Models: -20 to 75°C (-4 to 167°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
