|
|
TDS-16489U-SF3-R2-US - 16-bay Dual Processor NAS and iSCSI/ IP-SAN. 3U, SAS 12G, SAS/SATA 6G, 2 x 1GbE, 4 x 10GbE (SFP+), 40GbE- by QNAP
|
|
|
16-bay Dual Processor NAS and iSCSI/ IP-SAN. 3U, SAS 12G, SAS/SATA 6G, 2 x 1GbE, 4 x 10GbE (SFP+), 40GbE-ready, Redundant PSU. 4 additional 2.5" drive
Mfg SKU # : | TDS-16489U-SF3-R2-US |
|
|
|
Integrating an application server and storage server into one system, the next-generation TDS-16489U-SF3-R2-US also provides you with the option of using either QES (an enterprise-grade OS that provides efficient and reliable storage for mission-critical tasks) or QTS (a feature-rich OS for storage and diverse application servers). Whether being used as a file server, virtualization server, VDI, medium-sized data center, video streaming, surveillance storage, and efficient file backup & recovery, the flexible TDS-16489U R2 with dual CPU and dual OS options is your ideal solution.
TDS-16489U-SF3-R2-US
CPU |
E5-2630 v4 10-core 2.2 GHz processor x2 *Available with customization requirement |
CPU Architecture |
64-bit x86 |
Floating Point Unit |
|
Encryption Engine |
(AES-NI) |
Hardware-accelerated Transcoding |
QTS: Optional via a PCIe graphics card
QES: N/A |
System Memory |
256GB RDIMM DDR4 (8 x 32 GB) |
Maximum Memory |
RDIMM/LRDIMM: 1 TB (16 x 64 GB) |
Memory Slot |
16 x Long-DIMM DDR4 You can only use one type of dual in-line memory module (DIMM) at a time. Do not use registered DIMM (RDIMM) with load-reduction DIMM (LRDIMM) memory.
For the memory installation guidelines, see chapter 5 of the TDS-16489U User Guide. |
Flash Memory |
4GB (DOM for dual OS) |
Drive Bay |
Front: 16 x 3.5-inch
Rear: 4 x 2.5-inch |
Drive Compatibility |
3.5-inch bays:
3.5-inch SATA/SAS hard disk drives
2.5-inch SATA/SAS hard disk drives
2.5-inch SATA/SAS solid state drives
2.5-inch bays:
2.5-inch SATA/SAS solid state drives |
Hot-swappable |
|
SSD Cache Acceleration Support |
|
Gigabit Ethernet Port (RJ45) |
2 For a list of compatible network adapters, please visit the Compatibility List.
For instructions on how to install network adapters, please refer to Chapter 6 of the QNAP NAS Hardware Manual. |
10 Gigabit Ethernet Port |
4 x 10GbE SFP+ |
Jumbo Frame |
|
PCIe Slot |
4
Slot 1: PCIe Gen 3 x16
Slot 2: PCIe Gen 3 x8
Slot 3: PCIe Gen 3 x8
Slot 4: PCIe Gen 3 x8 |
USB 3.2 Gen 1 port |
4 |
IPMI |
3 (LAN, VGA, console)
*Only work with QTS OS |
Form Factor |
3U Rackmount |
LED Indicators |
HDD 1-16, Status, 10 GbE, LAN, storage expansion port status |
Buttons |
Power, Reset |
Dimensions (HxWxD) |
130.8 × 444 × 744 mm |
Weight (Net) |
22.42 kg |
Weight (Gross) |
30.19 kg |
Operating temperature |
0 - 40 °C (32°F - 104°F) |
Relative Humidity |
5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
Power Supply Unit |
Redundant/ Hot Swap ATX Power Supply,Input:
50-60 Hz
100-127V~/ 10A
200-240V/ 5A
Output: 770W |
Power Consumption: HDD Sleep Mode |
254.21 W |
Power Consumption: Operating Mode, Typical |
362.86 W Tested with drives fully populated. |
Fan |
4 x 60mm, 12VDC |
Sound Level |
37.8 db(A) |
System Warning |
Buzzer |
Max. Number of Concurrent Connections (CIFS) |
QTS: 1500
QES: 1500 |
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front of operating NAS.
Designs and specifications are subject to change without notice.
|
|