TL-D400S-US storage enclosure allows you to back up and expand your QNAP NAS, Windows® and Ubuntu® computers and servers. The TL-D400S features four 3.5-inch SATA 6Gb/s drive bays and comes with a QXP PCIe card for connecting the enclosure using a SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage and backup tasks.
TL-D400S-US
Drive Bay |
4 x 3.5-inch SATA 6Gb/s, 3Gb/s |
Drive Compatibility |
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives |
Audio Alert On/Off Switch |
|
Form Factor |
Tower |
Host Interface |
1 x SFF-8088 |
LED Indicators |
HDD 1-4, Status, Link, Fan error |
Buttons |
Power switch |
Dimensions (HxWxD) |
168.5 × 160.2 × 219 mm |
Weight (Net) |
3.66 kg |
Max. number of HDDs/SSDs supported |
4 |
Hard Drive Type |
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives |
Operating temperature |
0 - 40 °C (32°F - 104°F) |
Relative Humidity |
5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
Power Supply Unit |
65W adapter, 100 - 240V |
Power Consumption: Operating Mode, Typical |
22.985 W Tested fully polulated with Seagate ST6000NM0024 hard drives. |
Fan Mode Switch |
(Auto, high, medium, low) |
Fan |
1 x 120mm, 12VDC |
Sound Level |
20.1 db(A) |
System Warning |
Buzzer |
Kensington Security Slot |
|
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front of operating NAS.
Designs and specifications are subject to change without notice.
|