|
|
|
CPGS-9120-M12-C_SUMMARY.html
Leading EN50155 compliant Ethernet switch for rolling stock applicationSupports 3U and 8HP CompactPCI form factor and hot swappingPICMG 2.0 specification compatibleSupport 8x10/100/1000Base-T(X) ports on CompactPCI sockets and 4x10/100/1000Base-T(X) M12 connector portsSupport Jumbo frame up to 9.6K BytesSupports O-Ring (recovery time < 30ms over 250 units of connection), MSTP/RSTP/STP (IEEE 802.1s/w/D) for Ethernet RedundancyOpen-Ring support the other vendor's ring technology in open architectureO-Chain allow multiple redundant network ringsSupport standard IEC 62439-2 MRP (Media Redundancy Protocol) functionSupports IPV6 new internet protocol versionSupport Modbus TCP protocolSupport IEEE 802.3az Energy-Efficient Ethernet technology
|
|
|
CPGS-9120-M12-C_DESCRIPTION.html
ORing's CompactPCI series Ethernet switches are designed for industrial applications, such as factory automation, vehicle, and railway applicationa0 CPGS-9120-M12-C Ethernet switches are designed for industrial applications, such as factory automation, vehicle, and railway applicationa0 CPGS-9120-M12-C is CompactPCI managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports in CompactPCI socket and 4x10/100/1000Base-T(X) M12 connector which is specifically designed for the toughest and fully compliant with EN50155 requiremena0 The switch supports Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. CPGS-9120-M12-C Ethernet switch provides 4-port M12 connectors to ensure tight, robust connections, and guarantees reliable operation against environmental disturbances, such as vibration and shoca0 CPGS-9120-M12-C supports wide operating temperature from -40C to 70C which can fulfill most of the requirement of operation environmena0 Besides Web-based interface, Telnet and console (CLI) configuration, CPGS-9120-M12-C can also be managed centralized and conveniently by Open-Visioa0 Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
CPGS-9120-M12-C.html
Physical ports |
|---|
| 10/100/1000Base-T(X) ports with CompactPCI Interface | 8 (PICMG 2.0 compliant) | | 10/100/1000Base-T(X) ports in M12 | 4 x M12 connectors (8-pin A-coding, female) | | RS-232 Serial Console port | RS-232 in M12 connector (female A-coding). Baud rate setting: 115200bps, 8, N, 1 |
LED Indicators |
|---|
| System Indicator (Status) | Green: Ethernet status indicator | | Power Indicator (Power) | Green: Power LED x 1 | | Ring Master Indicator (R.M.) | Green: Indicates that the system is operating in O-Ring Master mode | | O-Ring Indicator (Ring) | Green: Indicates that the system operating in O-Ring mode
Green Blinking: Indicates that the Ring is broken. | | Fault Indicator (Fault) | Red: Indicate unexpected event occurred | | 10/100/1000Base-T(X) M12 Port Indicator | Green LED for Link/Act indicator: Green for link-up, Off for link-down, Blinking for Act. |
Power |
|---|
| Power consumption (Typ.) | 7.5 Watts | | Redundant Input power | CompactPCI bus powered (5VDC) | | Overload current protection | Present | | Reverse polarity protection | Present |
Protection / Certification |
|---|
| Safety | EN 60950-1 |
Physical Characteristic |
|---|
| Enclosure | CompactPCI | | Dimensions (mm) | 40 (W) x 209 (D) x 130.7 (H) mm1.58 (W) x 8.23 (D) x 5.15 (H) inch | | Weight (g) | 340 g |
Technology |
|---|
| Ethernet Standards | IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) | | MAC Table | 8K | | Packet buffer Size | 4Mbits | | Priority Queues | 8 | | Processing | Store-and-Forward | | Switch Properties | Switching latency: 7 us
Switching bandwidth: 24Gbps
Max. Number of Available VLANs: 4096
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define | | Jumbo frame | Up to 9.6K Bytes | | Security Features | Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
| | Software Features | STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP | | Network Redundancy | O-Ring
O-Chain
MRP
MSTP (STP / RSTP compatible)
| | Warning / Monitoring System | Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support |
Reset Function |
|---|
| Reset Button | 5 sec: Factory default |
Environmental |
|---|
| Storage Temperature | -40 to 85? (-40 to 185?) | | Operating Temperature | -40 to 70? (-40 to 158?) | | Operating Humidity | 5% to 95% Non-condensing |
|
l');
?>
|
