|
|
|
TGPS-9080-M12A-MV_SUMMARY.html
Leading EN50155-compliant Ethernet switch for rolling stock applicationSupport O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet RedundancyO-Chain allow multiple redundant network rings*note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) functionSupports IEEE 802.3at compliant PoE and total power budget is 60 Watts with maximum 30Watts per portSupport PoE scheduled configuration and PoE auto-ping check functionSupport IEEE 1588v2 clock synchronizationSupport IPV6 new internet protocol versionSupport Modbus TCP protocolSupport IEEE 802.3az Energy-Efficient Ethernet technologyProvided HTTPS/SSH protocol to enhance network securitySupport SMTP clientSupport IP-based bandwidth managementSupport application-based QoS managementSupport Device Binding security functionSupport DOS/DDOS auto preventionIGMP v2/v3 (IGMP snooping support) for filtering multicast trafficSupport SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network ManagementSupport ACL and 802.1x User Authentication for securitySupport DBU-01 (Data backup unit for easy configuration backup)Supports 9.6K Bytes Jumbo FrameMultiple notification for warning of unexpected eventWeb-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configurationWall mounting enabledIP-40 housing design
|
|
|
TGPS-9080-M12A-MV_DESCRIPTION.html
ORing's TransporterTM series managed Ethernet switches are designed for industrial applications such as rolling stock,vehicle, and railway. The TGPS-9080-M12A-MV managed Ethernet switches are designed for industrial applications such as rolling stock,vehicle, and railway. The TGPS-9080-M12A-MV,which is compliant with the EN50155 standard, is a managed Gigabit Redundant Ring Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. which is specifically designed for the toughest and fully compliant with EN50155 requirement. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), O-Chain and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. It is specifically designed for the toughest industrial environments. TGPS-9080-M12A-MV EN50155 Ethernet switch uses M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock.TGPS-9080-M12A-MV also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGPS-9080-M12A-MV switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will
provide power in a PoE connection. While TGPS-9080-M12A-MV complies with EN50155, the switch supports wide operating temperature from -a0oC to a0oC. TGPS-9080-M12A-MV can also be managed centralized and convenient by Open-Vision,Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Ethernet application.
TGPS-9080-M12A-MV.html
Physical ports |
|---|
| 10/100/1000Base-T(X) ports with P.S.E. in M12 | 8 x M12 connectors (8-pin A-coding, female) | | RS-232 Serial Console port | RS-232 in M12 connector (female A-coding). Baud rate setting: 115200bps, 8, N, 1 |
LED Indicators |
|---|
| Power Indicator (Power) | Green: Power LED x 1 | | Ring Master Indicator (R.M.) | Green: Indicates that the system is operating in O-Ring Master mode | | O-Ring Indicator (Ring) | Green: Indicates that the system operating in O-Ring mode
Green Blinking: Indicates that the Ring is broken. | | Fault Indicator (Fault) | Red: Indicate unexpected event occurred | | 10/100/1000Base-T(X) M12 P.S.E. Port Indicator | Top Green LED for port Link/Act indicator.
Middle Green LED for PoE enable indicator
Bottom dual color LED for Ethernet speed indicator: Green LED for 1000Mbps, Amber for 100Mbps, Off for 10Mbps |
Power |
|---|
| Power consumption (Typ.) | 13 Watts (PoE output not include) | | Redundant Input power | 72/96/110VDC (50.4-137.5VDC). 7/8 inch 5-pin male connector | | Total PoE Output Power | 60 watts Max. | | Overload current protection | Present | | Reverse polarity protection | Present |
Protection / Certification |
|---|
| Safety | EN60950-1 |
Physical Characteristic |
|---|
| Enclosure | IP-30, Iron | | Dimensions (mm) | 205 (W) x 99 (D) x175 (H) mm80.71 W) x 3.898 (D) x 6.89 (H) inch | | Weight (g) | 1790 g |
Technology |
|---|
| Ethernet Standards | IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) | | MAC Table | 8K | | Packet buffer Size | 4Mbits | | Priority Queues | 8 | | Processing | Store-and-Forward | | Switch Properties | Switching latency: 7 us
Switching bandwidth: 16Gbps
Max. Number of Available VLANs: 4095
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
| | Jumbo frame | Up to 9.6K Bytes | | Security Features | Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security | | Software Features | STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
NTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Modbus TCP | | Network Redundancy | O-Ring
O-Chain
MRP
MSTP (RSTP/STP compatible) | | Warning / Monitoring System | Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support |
Fault contact |
|---|
| Relay | Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding, female) |
Reset Function |
|---|
| Reset Button | 5 sec: Factory default |
Environmental |
|---|
| Storage Temperature | -40 to 85? (-40 to 185?) | | Operating Temperature | -40 to 75? (-40 to 167?) | | Operating Humidity | 5% to 95% Non-condensing |
|
l');
?>
|
