|
|
|
TN-5510A-2GTXBP-WV-T - L2 Managed Ethernet switch with 8 10/100BaseT(X) and 2 10/100/1000 Base-T(X) M12 ports with bypass relay
by MOXA
|
|
|
|
• 2 Gigabit ports with optional bypass relay function
• Isolated power with wide 24 to 110 VDC power supply range
• Essential compliance with EN 50155*
lor: rgb(255, 255, 255);" />
• Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and STP/RSTP/MSTP for network redundancy
• -40 to 75°C operating temperature range
|
|
|
The ToughNet TN-5500A series M12 managed Ethernet switches are designed for railway applications, such as rolling stock, and wayside installations. The TN series switches use M12 and other circular connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. The TN-5500A series Ethernet switches provide 8 or 16 Fast Ethernet M12 ports with or without 8 IEEE 802.3at/af compliant PoE (Power-over-Ethernet) ports. The PoE switches are classified as power source equipment (PSE) and provide up to 30 watts of power per port, and can be used to power IEEE 802.3at/af compliant powered devices (PDs), such as IP cameras, wireless access points, and IP phones. In addition, the 24 to 110 VDC wide power input range and isolated power inputs not only allow you to use the same type of power source at different sites around the globe, but also increase the reliability of your communications system. In addition, the -40 to 75°C operating temperature and IP54-rated waterproof enclosure allow deployment in harsh environments. Moreover, the TN-5500A series is compliant with the essential sections of EN 50155, covering operating temperature, power input voltage, surge, ESD and vibration, making the switches suitable for a variety of industrial applications.
| • Technology |
| Standards |
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP |
| Protocols |
IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, SNMP Inform, LLDP,
IEEE 1588 PTP v2, IPv6, NTP Server/Client, EtherNet/IP, Modbus/TCP |
| MIB |
MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 |
| Flow Control |
IEEE802.3x flow control, back pressure flow control |
| • Switch Properties |
| Priority Queues |
4 |
| Max. Number of Available VLANs |
64 |
| VLAN ID Range |
VID 1 to 4094 |
| IGMP Groups |
256 |
| • Interface |
| Fast Ethernet |
Front cabling, M12 D-coded 4-pin female connector, 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| Gigabit Ethernet |
Down cabling, M12 X-coded 8-pin female connector, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, auto MDI/MDI-X connection, with or without bypass relay function |
| Console Port |
M12 A-coding 5-pin male connector |
| System LED Indicators |
PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/ TAIL |
| Port LED Indicators |
10/100M (Fast Ethernet port), 10/100/1000M (Gigabit Ethernet port) |
| Alarm Contact |
2 relay outputs in one M12 A-coding 5-pin male connector with current carrying capacity of 1A @ 30 VDC |
| • Power Requirements |
| Input Voltage |
WV: 24 to 110 VDC (16.8 to 137.5 VDC) |
| Max. Input Current |
TN-5510A series: 0.56 A @ 24 VDC; 0.13 A @ 110 VDC
TN-5518A series: 0.68 A @ 24 VDC; 0.16 A @ 110 VDC |
| Overload Current Protection |
Present |
| Connection |
M23 connector |
| Reverse Polarity Protection |
Present |
| • Physical Characteristics |
| Housing |
Aluminium alloy, IP54 protection (optional protective caps available for unused ports) |
| Dimensions |
TN-5510A Series: 185 x 180.9 x 76.0 mm (7.28 x 7.12 x 2.99 in)
TN-5518A Series: 250 x 180.9 x 76.0 mm (9.84 x 7.12 x 2.99 in) |
| Weight |
TN-5510A Series: 1,711 g
TN-5518A Series: 2,250 g |
| Installation |
Panel mounting, DIN-rail mounting (with optional kit: DK-DC50131) |
| • Environmental Limits |
| Operating Temperature |
-40 to 75°C (-40 to 167°F) |
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity |
5 to 95% (non-condensing) |
| Vibration |
IEC 60068-2-6, 2-17.8 Hz: ±1.6 mm; 17.8-500 Hz: 2 g; 2 hours/axis |
| Shock |
IEC 60068-2-27, 20 g / 11 ms |
| Ingress Protection |
IEC 60529, IP54 |
| Altitude |
Up to 2,000 m |
| Note |
Please contact Moxa if you require products guaranteed to function at higher altitudes |
| • Standards and Certifications |
| Safety |
UL/cUL 508, EN 60950-1 (LVD) |
| EMC |
EN 55022, EN 55024 |
| EMI |
CISPR 22, FCC Part 15B Class A |
| EMS |
IEC 61000-4-2 ESD: Contact 6 kV; Air 8 kV
IEC 61000-4-3 RS: 20 V/m (80 MHz to 1 GHz)
IEC 61000-4-4 EFT: Power 2 kV; Signal 2 kV
IEC 61000-4-5 Surge: Power 2 kV; Signal 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 |
| Rail Traffic |
(for panel mounting installations)EN 50155 (essential compliance*), EN 50121-4, EN 50121-3-2,
EN 45545-2 |
| • *Please contact Moxa or a Moxa distributor for details. |
| Shock |
IEC 61373 |
| Freefall |
IEC 60068-2-32 |
| Vibration |
EN 50155, IEC 61373 |
| • MTBF |
| Time |
TN-5510A-2GTX series: 758,855 hrs
TN-5510A-2GTXBP series: 742,880 hrs
TN-5518A-2GTX series: 647,128 hrs
TN-5518A-2GTXBP series: 628,808 hrs |
| Standard |
Telcordia SR332, GB, 25°C |
| Note |
Please check Moxa’s website for the most up-to-date certification status. |
|
|
