Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
ORing TPS-1080-M12 - EN50155 IP40  8x 10/100TX (M12) PoE @30Watts + 1x 10/100TX (RJ-45) by ORing Industrial Networking

ORing TPS-1080-M12 - EN50155 IP40 8x 10/100TX (M12) PoE @30Watts + 1x 10/100TX (RJ-45)
by ORing Industrial Networking

Write a review Write a review
TPS-1080-M12Series_SUMMARY
  • Leading EN50155-compliant Ethernet switch for rolling stock application
  • Provide 8x10/100Base-T(X) PoE (P.S.E.) ports
  • Supports IEEE 802.3at compliant PoE with maximum 30Watts per port
  • Support dual power inputs for power redundancy
  • Support auto-negotiation and auto-MDI/MDI-X
  • Support store and forward transmission
  • Support flow control
  • M12 connectors to guarantee reliable operation against environmental disturbances
  • Rigid IP-40 housing design
  • Wall mounting enabled
ORing’s TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TPS-1080-M12 is an un-managed PoE Ethernet switch with 8x10/100Base-T(X) P.S.E. which is specifically designed for the toughest and fully compliant with EN50155 requirement. TPS-1080-M12 also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TPS-1080-M12 switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. TPS-1080-M12 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the wide operating temperature range from -40 oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet application.
Physical Ports  
10/100 Base-T(X) Ports in M12 Auto MDI/MDIX with P.S.E. 8 x M12 connector (4-pin D-coding)
Technology  

Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3x for Flow control
IEEE 802.3at compliant PoE specification (Maximum 30Watts per port)

MAC Table

8K MAC addresses

Processing

Store-and-Forward

LED Indicators  
Power Indicator Green : Power LED x 3

Fault Indicatorr

Amber : Indicate PWR1 or PWR2 failure

10/100Base-T(X) M12 port indicator
and PoE indicator

Top for port Link/Act indicator. Green for 100Mbps link, Amber for 10 Mbps link
Middle Amber for Duplex / Collision indicator
Bottom blue for PoE Injected indicator
Fault contact  
Relay

Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)

Power  
Redundant Input Power

Dual 48VDC on 5-pin M23 connector

 
Power Consumption (Typ.) 2.5 Watts (power consumption of P.S.E. is not
included)
 
PoE Output Power 240 Watts  
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristic  
Enclosure IP-40
Dimension (W x D x H)

125 (W) x 65 (D) x196 (H) mm

Weight (g)

996 g

 
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals  
EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS

EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11

Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Recently Viewed Items

Copyright © 2025 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.