|
|
|
TPS-3082GT-M12X-BP1-MV - EN50155 12-port managed PoE switch; 8FE/PSE M12 + 2GE M12, 1 bypass included, 110VDC
by ORing Industrial Networking
|
|
|
|
TPS-3082GT-M12X-BP1-MV_SUMMARY.html
Leading EN50155-compliant Ethernet switch for rolling stock application8 ports P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per portWorld's fastest Redundant Ethernet Ring: O-Ring(recovery time < 10ms over 250 units of connection) O-Chain support applications with multiple redundant rings topologySupport standard IEC 62439-2 MRP*NOTE(Media Redundancy Protocol) functionSTP/RSTP/MSTP supportedSupport PTP Client (Precision Time Protocol) clock synchronizationSupport Modbus TCP protocolIGMP v2/v3 (IGMP snooping support) for filtering multicast trafficSNMP v1/v2c/v3 support for secure network managementRMON for traffic monitoringSupport VLAN and LLDP protocolDHCP assigns each Equipment IP by each PortProvided Relay bypass function with two-gigabit portsEvent notification through Syslog, Email, SNMP trap, and Relay OutputWindows utility ( Open-Vision) supports centralized management and configurable by Web-based, Telnet, and Console (CLI)M12 connectors to guarantee reliable operation against environmental disturbancesWall mounting enabled
|
|
|
TPS-3082GT-M12X-BP1-MV_DESCRIPTION.html
The TPS-3082GT-M12X-BP1-MV is an EN50155 10-port managed PoE Ethernet switch with 8x10/100Base-T(X) P.S.E. and 2x10/100/1000Base-T(X), M12 connector and 1xbypass included, 110VDC power input ORing's Transporter managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TPS-3082GT-M12X-BP1-MV managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TPS-3082GT-M12X-BP1-MV is a managed PoE Redundant Ring Ethernet switch with 8x10/100Base-T(X) P.S.E. and 2x10/100/1000Base-T(X) ports which is specifically designed for the toughest and fully compliant with EN50155 requirement. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), O-Chain, MRP *NOTEand MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. TPS-3082GT-M12X-BP1-MV also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TPS-3082GT-M12X-BP1-MV switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. TPS-3082GT-M12X-BP1-MV EN50155 Ethernet switch uses M12 connectors to ensure tight, robust connections and guarantee reliable operation against environmental disturbances, such as vibration and shock. TPS-3082GT-M12X-BP1-MV can be managed centralized and convenient by a powerful windows utility ~ Open-Vision. In addition, the wide operating temperature range from -40oC to 75oC can satisfy most of the operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet applications.
TPS-3082GT-M12X-BP1-MV.html
Physical ports |
|---|
| 10/100/1000Base-T(X) ports in M12 | 2 x M12 connectors (8-pin X-coding, female) | | 10/100Base-T(X) ports with P.S.E. in M12 | 8 x M12 connector (4-pin D-coding, female) | | RS-232 Serial Console port | RS-232 in M12 connector (5-pin A-coding, female). Baud rate setting: 9600bps, 8, N, 1 |
LED Indicators |
|---|
| Power Indicator (Power) | Green: Power LED x 1 | | Ring Master Indicator (R.M.) | Green: Indicates that the system is operating in O-Ring Master mode | | O-Ring Indicator (Ring) | Green: Indicates that the system operating in O-Ring mode
Green Blinking: Indicates that the Ring is broken.
| | Fault Indicator (Fault) | Amber: Indicate unexpected event occurred | | 10/100Base-T(X) M12 P.S.E. Port Indicator | Top Green LED for Link/Act indicator
Middle Green LED for PoE enabled indicator
Bottom Amber LED for Collision/Duplex indicator | | 10/100/1000Base-T(X) M12 Port Indicator | Top Green LED for Link/Act indicator
Bottom Amber LED for 100Mbps indicator |
Power |
|---|
| Power consumption (Typ.) | 24 watts (PoE output not included) | | Redundant Input power | 72/110 (50.4-137.5) VDC. 7/8 inch 5-pin male connector | | Total PoE Output Power | 95 watts | | Overload current protection | Present | | Reverse polarity protection | Present |
Protection / Certification |
|---|
| Safety | EN60950-1 |
Physical Characteristic |
|---|
| Enclosure | IP-30, Iron | | Dimensions (mm) | 260 (W) x 79.3 (D) x 222 (H) mm10.236 (W) x 3.122 (D) x 8.74 (H) inch | | Weight (g) | 2750 g |
Technology |
|---|
| Ethernet Standards | IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3af PoE specification (up to 15.4 Watts per port for P.S.E.) | | MAC Table | 8192 MAC addresses | | Packet buffer Size | 1Mbits | | Priority Queues | 4 | | Processing | Store-and-Forward | | Switch Properties | Switching latency: 7 us
Switching bandwidth: 5.6Gbps
Max. Number of Available VLANs: 4096
IGMP multicast groups: 1024
Port rate limiting: User Define | | Security Features | Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q) to segregate and secure network traffic
Supports Q-in-Q VLAN for performance & security to expand the VLAN space
Radius centralized password management
SNMP v1/v2c/v3 encrypted authentication and access security | | Software Features | STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
NTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Modbus TCP | | Network Redundancy | O-Ring
O-Chain
MRP
STP
RSTP
MSTP | | Warning / Monitoring System | Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support |
Fault contact |
|---|
| Relay | Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding, female) |
Reset Function |
|---|
| Reset Button | 5 sec: Factory default |
Environmental |
|---|
| Storage Temperature | -40 to 85? (-40 to 185?) | | Operating Temperature | -40 to 75? (-40 to 167?) | | Operating Humidity | 5% to 95% Non-condensing |
|
l');
?>
|
