|
|
|
TPS-W9124GT-M12X-BP2-24V-IP54 - EN50155 Managed PoE Switch with 12FE PoE and 4GE Bypass, M12 connector, IEEE 802.3af/at, IP54, 2
by ORing Industrial Networking
|
|
|
|
TPS-W9124GT-M12X-BP2-24V-IP54_SUMMARY.html
Leading EN50155-compliant Ethernet switch for rolling stock applicationSupport O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) for Ethernet RedundancyO-Chain allow multiple redundant network ringsSupports standard IEC 62439-2 MRP *NOTE (Media Redundancy Protocol) functionSupports IEEE 802.3af/at compliant PoE with maximum 15.4/30Watts per portSupports PoE scheduled configuration and PoE auto-ping check functionSupports isolated power protectionSupports IEEE 1588v2 clock synchronizationSupports IPV6 new internet protocol versionSupports Modbus TCP protocolSupports IEEE 802.3az Energy-Efficient Ethernet technologyProvided HTTPS/SSH protocol to enhance network securitySupports IP-based bandwidth managementSupports application-based QoS managementSupports Device Binding security functionSupports DOS/DDOS auto preventionIGMP v2/v3 (IGMP snooping support) for filtering multicast trafficSupports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network ManagementSupports ACL, TACACS+ and 802.1x User Authentication for securitySupports 9.6K Bytes Jumbo FrameMultiple notification for warning of unexpected eventWeb-based, Telnet, Console (CLI), and Windows utility (Open-Vision) configurationSupports LLDP ProtocolWall mounting enabledSupports IP-54 grade waterproof design
|
|
|
TPS-W9124GT-M12X-BP2-24V-IP54_DESCRIPTION.html
ORing's Transporter managed PoE Ethernet switches are designed for industrial waterproof applications, such as rolling stock, vehicle, and railway applicationa0 TPS-W9124GT-M12X-BP2-24V-IP54 managed PoE Ethernet switches are designed for industrial waterproof applications, such as rolling stock, vehicle, and railway applicationa0 TPS-W9124GT-M12X-BP2-24V-IP54 is managed Redundant Ring Ethernet switch with 12x10/100Base-T(X) P.S.E. and 4x10/100/1000Base-T(X) ports which is specifically designed for the toughest and fully compliant with EN50155 requiremena0 The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 10/30ms over 250 units of connection), O-Chain, MRP*NOTE and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technologa0 TPS-W9124GT-M12X-BP2-24V-IP54 also supports Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet networa0 Each TPS-W9124GT-M12X-BP2-24V-IP54 switch has 12x10/100Base-T(X) P.S.E. (Power Sourcing Equipment) porta0 P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connectioa0 TPS-W9124GT-M12X-BP2-24V-IP54 includes 2 sets of bypass ports that protect the network from failures and Network maintenance by ensuring network integrity during power losa0 And support wide operating temperature from -40oC to 75oa0 TPS-W9124GT-M12X-BP2-24V-IP54 can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet, and console (CLI) configuratioa0 Therefore, the switch is one of the most reliable choices for EN50155 waterproof highly-managed Ethernet application.
TPS-W9124GT-M12X-BP2-24V-IP54.html
Physical ports |
|---|
| 10/100/1000Base-T(X) ports in M12 | 4 x M12 connectors (8-pin X-coding, female) | | 10/100Base-T(X) ports with P.S.E. in M12 | 12 x M12 connectors (4-pin D-coding, female) |
LED Indicators |
|---|
| Power Indicator (Power) | Green: Power LED x 2 | | Ring Master Indicator (R.M.) | Green: Indicates that the system is operating in O-Ring Master mode | | O-Ring Indicator (Ring) | Green: Indicates that the system operating in O-Ring mode
Green Blinking: Indicates that the Ring is broken. | | Fault Indicator (Fault) | Red: Indicate unexpected event occurred | | 10/100Base-T(X) M12 P.S.E. Port Indicator | Top Green LED for Link/Act indicator: Green for link-up, Off for link-down, Blinking for Act.
Middle Green LED for PoE enabled indicator: Green for PoE enabled, Off for PoE disable.
Bottom dual color LED for Ethernet speed indicator: Amber for 100Mbps, Off for 10Mbps
| | 10/100/1000Base-T(X) M12 Port Indicator | Top Green LED for Link/Act indicator: Green for link-up, Off for link-down, Blinking for Act.
Bottom dual color LED for Ethernet speed indicator: Green for 1000Mbps, Amber for 100Mbps, Off for 10Mbps |
Power |
|---|
| Power consumption (Typ.) | 22 Watts (PoE output not include) | | Redundant Input power | Dual 24VDC (power rating: 16.8~30VDC) on dual 4-pin male S-coding connector | | Total PoE Output Power | 24VDC: 60 Watts Max.
?24VDC: 90 Watts Max. | | Overload current protection | Present | | Reverse polarity protection | Present |
Protection / Certification |
|---|
| Safety | IEC/EN 62368-1 |
Physical Characteristic |
|---|
| Enclosure | IP-54 waterproof, Iron | | Dimensions (mm) | 280 (W) x 90 (D) x 182 (H) mm 11.02 (W) x 3.54 (D) x 7.17 (H) inch | | Weight (g) | 3220 g |
Technology |
|---|
| Ethernet Standards | IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
IEEE 802.3af PoE specification (up to 15.4 Watts per port for P.S.E.)
| | MAC Table | 8K | | Packet buffer Size | 4Mbits | | Priority Queues | 8 | | Processing | Store-and-Forward | | Switch Properties | Switching latency: 7 us
Switching bandwidth: 10.4 Gbps
Max. Number of Available VLANs: 4095
VLAN ID range: VID 1 to 4094
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
| | Jumbo frame | Up to 9.6K Bytes | | Security Features | Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security | | Software Features | STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP | | Network Redundancy | O-Ring
O-Chain
MRP
MSTP (RSTP/STP compatible) | | Warning / Monitoring System | Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support |
Reset Function |
|---|
| Reset Button | 5 sec: Factory default |
Environmental |
|---|
| Storage Temperature | -40 to 85? (-40 to 185?) | | Operating Temperature | -40 to 75? (-40 to 167?) | | Operating Humidity | 5% to 95% Non-condensing |
|
l');
?>
|
