|
|
|
TXES-180-M12_SUMMARY.html
Leading EN50155-compliant Ethernet switch for rolling stock applicationProvided 8x10/100/500Base-T(X) portsSupports auto-negotiation and auto-MDI/MDI-XSupports store and forward transmissionSupports flow controlM12 connectors to guarantee reliable operation against environmental disturbancesRigid IP-30 housing designWall mounting enabled
|
|
|
TXES-180-M12_DESCRIPTION.html
ORing's TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.\xa0 The TXES-180-M12 un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.\xa0 The TXES-180-M12 is an un-managed Ethernet switch with 8x10/100/500Base-T(X) which is specifically designed for the toughest and fully compliant with EN50155 requirement.\xa0 TXES-180-M12 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock.\xa0 In addition, the wide operating temperature range from -40oC to 75oC can satisfy most of operating environment.\xa0 The TXES-180-M12 can be easily adopted in all kinds of applications and provides the most rugged solutions for your network.\xa0 Therefore, the switch is one of the most reliable choices for rolling stock Ethernet application. While installing in the train, TXES-180-M12 is mainly used for in-train monitoring and Entertainment service due to its high-speed Ethernet connection. Devices connected will be IP camera or CCTV for the use of train surveillance. As an unmanaged Ethernet Switch, TXES-180-M12 is not able and will not be used for any control related application. Its main function is simply forwarding the Ethernet packet from one Ethernet based device to another Ethernet device which are all connected to the Switch.
TXES-180-M12.html
Specifications |
| ORing Switch Model |
TXES-180-M12 |
| Physical Ports |
- |
| 10/100/500Base-T(X) Ports in M12 Auto MDI/MDIX |
8 (4-pin female D-coding)
|
| Technology |
- |
|
Ethernet Standards
|
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3x for Flow control
|
|
MAC Table
|
4k
|
|
Packet buffer
|
1.5Mbits
|
|
Processing
|
Store-and-Forward
|
|
Switch Properties
|
Switching latency: <7 �s
Switching bandwidth: 1.6Gbps
|
| LED Indicators |
- |
| Power Indicator(Power) |
Green : Power LED x 1 |
|
10/100/500Base-T(X) M12 Port Indicator
|
Top green LED for 10/100Mbps port Link/Act indicator: On for link-up, Off for link-down, Blinking for
active.
Bottom green LED for 500Mbps port Link/Act indicator: On for link-up, Off for link-down,
Blinking for active. |
| Power |
- |
| Input power |
12-48VDC on 4-pin M12 A-coded male connector
*NOTICE: For EN50155 railway applications,
24VDC power input is required.
|
| Power Consumption (Typ.) |
1.6 Watts max. |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present |
| Physical Characteristic |
- |
| Enclosure |
IP-30 |
| Dimension (W x D x H) |
88.9 (W) x 40 (D) x178.2 (H) mm
3.5 (W) x 1.57 (D) x 7.02 (H) inch
|
| Weight (g) |
550 g
|
| Environmental |
- |
| Storage Temperature |
-40 to 85C (-40 to 185F) |
| Operating Temperature |
-40 to 75C-(-40 to 167F) |
| Operating Humidity |
5% to 95% non-condensing |
| Regulatory approvals |
- |
| EMC |
CE EMC (EN 55035, EN 55032), FCC Part 15 B, EN 50155(EN 50121-1, EN 50121-3-2) |
| EMI |
EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A |
| EMS |
EN 55035 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5
(Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP))
|
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-31 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN 62368-1 |
| Other |
EN 50155 (IEC 61373) |
|
|
