Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
IGS-P9164GC-HV - Industrial 20-port DIN Rail managed Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit Combo ports by ORing Industrial Networking

IGS-P9164GC-HV - Industrial 20-port DIN Rail managed Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit Combo ports
by ORing Industrial Networking

Write a review Write a review
IGS-P9164
  • Designed for power substation / Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613
  • Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
  • Open-Ring support the other vendor’s ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
  • Support IEEE 1588v2 clock Synchronization
  • Support IPV6 new internet protocol version
  • Support Modbus TCP protocol
  • Provided HTTPS/SSH protocol to enhance network security
  • Support IEEE 802.3az Energy-Efficient Ethernet technology
  • Support SMTP client and NTP server protocol
  • Support LLDP Protocol
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled
  • Support IP-based bandwidth management
  • Support application-based QoS management
  • Support Device Binding security function
  • Support DOS/DDOS auto prevention
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
  • Support ACL, TACACS+ and 802.1x User Authentication for security
  • Support 9.6K Bytes Jumbo Frame
  • Support DBU-01 backup unit to quickly backup/restore configuration
  • Multiple notification for warning of unexpected event
  • Support DBU-01 backup unit device to quickly backup/restore configuration
  • Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
Mfg SKU # : IGS-P9164GC-HV
Our Price : $1,851.00
Stock : 3
Quantity :

IGS-P9164 series are IEC 61850-3 managed redundant ring Ethernet switches. These switches are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IGS-P9164GF series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x1000Base-X optical fiber port with SC connector. IGS-P9164GFX series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x100Base-FX optical fiber port with SC connector. IGS-P9164GC series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4xGigabit combo ports with SFP socket. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 75 oC. IGS-P9164GF(X) series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.

Physical Ports
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX

16

Gigabit Combo Port with 10/100/1000Base-T(X) and 100/1000Base-X SFP Port 4
Technology
  Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX 
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.3x for Flow control 
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) 
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging 
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) 
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8k
Packet Buffer 4Mbits
Priority Queues 8
Processing Store-and-Forward
Switch Properties Switching latency: 7 us
Switching bandwidth: 40Gbps
Max. Number of Available VLANs: 4095
VLAN ID Range : 1 to 4094
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Jumbo Frame up to 9.6K Bytes
Security Feature Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units 
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
NTP server
Network Redundancy O-Ring 
Open-Ring
O-Chain
MRP
Fast Recovery
MSTP (RSTP/STP compatible)
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable.  115200bps, 8, N, 1
LED Indicators
Power Indicator Green : Power LED x 3
Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring) Green : Indicates that the system operating in O-Ring mode 
Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault) Amber : Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 Port Indicator Green LED for Link/Act indicator.
Dual color LED for speed indicator : Green for 1000Mbps,  Amber for 100Mbps,  Off light for 10Mbps
100/1000Base-X SFP Port Indicator Green for port Link/Act.
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC on 3-pin terminal block
Power
Redundant Input Power Dual power inputs with 12~48VDC on dual 2-pin terminal block
Power Consumption (Typ.) 17Watts
Overload Current Protection

Present

Reverse Polarity Protection

Present

Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 115 (W) x 159 (D) x 154 (H)mm (4.53 x 6.3 x 6.06 inch)
Weight (g) 1750 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 75oC (-40 to 167oF )
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
Power Automation IEC 61850-3, IEEE 1613
EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMS EN61000-4-2 (ESD)
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.