|
|
|
PT-7828-F-24-24 - IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot
by MOXA
|
|
|
|
- Layer 3 switching functionality to divide a large network into hierarchical subnets and allow data and information to communicate across networks
- Command Line Interface (CLI) for quickly configuring major managed functions
- Software-based IEEE 1588v2 PTP (Precision Time Protocol) for precise time synchronization of networks
- DHCP Option 82 for IP address assignment with different policies
- EtherNet/IP and Modbus/TCP industrial Ethernet protocols supported
- Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches),
- RSTP/STP, and MSTP for network redundancy
Supports multicast routing protocols PIM-DM/DVMRP
Supports advanced VLAN capability with Q-in-Q tagging
IGMP snooping and GMRP for filtering multicast traffic from industrial Ethernet protocols
IEEE 802.3ad, LACP for optimum bandwidth utilization
Bandwidth management prevents unpredictable network status
Multi-port mirroring for online debugging
Automatic warning by exception through email, relay output
RMON for efficient network monitoring and proactive capability
Automatic recovery of connected device’s IP addresses
Line-swap fast recovery
Configurable by Web browser, Telnet/Serial console, CLI Windows utility, and ABC-01 automatic backup configurator
- User passwords with multiple levels of security protect against unauthorized configuration
- SSH/HTTPS is used to encrypt passwords and data
- Lock switch ports with 802.1X port-based network access control so that only authorized clients can access the port
- Disable one or more ports to block network traffic
- 802.1Q VLAN allows you to logically partition traffic transmitted between selected switch ports
- Secure switch ports so that only specific devices and/or MAC addresses can access the ports
- Radius/TACACS+ allows you to manage passwords from a central location
- SNMPv3 provides encrypted authentication and access security
|
|
|
The PowerTrans PT-7828 switches are high performance Layer 3 Ethernet switches that support Layer 3 routing functionality to facilitate the deployment of applications across networks. The PT-7828 switches are also designed to meet the strict demands of power substation automation systems (IEC 61850-3, IEEE 1613), and railway applications (EN 50121-4).
The PT-7828’s Gigabit and Fast Ethernet backbone, redundant ring, and 24 VDC, 48 VDC, or 110/220 VDC/VAC dual isolated redundant power supplies increase the reliability of your communications and save on cabling and wiring costs. The modular design of the PT-7828 makes network planning easy, and allows greater flexibility by letting you install up to 4 Gigabit ports and 24 Fast Ethernet ports. Optional front or rear wiring makes the PT-7828 switches suitable for a variety of applications.
| • Technology |
| Standards |
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP |
| Protocols |
IGMPv1/v2/v3, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, BootP, TFTP, SNTP, SMTP, RARP, LACP, RMON, RIP V1/V2, HTTP, HTTPS, Telnet, SSH, Syslog, DHCP Option 66/67/82, LLDP, EtherNet/IP, Modbus/TCP, IEEE 1588v2 PTP, SNMP Inform, NTP Server/Client |
| Layer 3 Switching |
Static routing, RIP V1/V2, OSPF, PIM-DM/DVMRP |
| Layer 3 Switching Redundancy |
VRRP |
| MIB |
MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Groups 1, 2, 3, 9 |
| Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| • Switch Properties |
| Priority Queues |
4 |
| Max. Number of Available VLANs |
64 |
| VLAN ID Range |
VID 1 to 4094 |
| IGMP Groups |
256 |
| • Interface |
| Fast Ethernet |
Slots 1, 2, and 3 for combinations of 2, 4, 6, or 8-port PM-7200 Fast Ethernet modules with 10/100BaseT(X) (TP/M12 interface), 100BaseFX (SC/ST/MTRJ connector), or 100BaseSFP |
| Gigabit Ethernet |
Slot 4 for 2 or 4-port PM-7200 Gigabit Ethernet combo module, 10/100/1000BaseT(X) or 1000BaseSFP |
| Console Port |
RS-232 (RJ45) |
| System LED Indicators |
STAT, PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL |
| Mode LED Indicators |
LNK/ACT, FDX/HDX, RING/CHAIN PORT, COUPLER PORT, SPEED |
| Alarm Contact |
1 relay output with current carrying capacity of 3 A @ 30 VDC or 3 A @ 240 VAC |
| • Power Requirements |
| Input Voltage |
• 24 VDC (18 to 36 V)
• 48 VDC (36 to 72 V)
• 110/220 VDC/VAC (88 to 300 VDC, 85 to 264 VAC) |
| Note |
Compliant with EN 50155 on 24/48/110 VDC |
| Input Current |
(all ports are equipped with fiber)
• Max. 2.58 A @ 24 VDC
• Max. 1.21 A @ 48 VDC
• Max. 0.64/0.33 A @ 110/220 VDC
• Max. 0.53/0.28 A @ 110/220 VAC |
| Overload Current Protection |
Present |
| Connection |
10-pin terminal block |
| Reverse Polarity Protection |
Present |
| • Physical Characteristics |
| Housing |
IP30 protection |
| Dimensions |
440 x 44 x 325 mm (17.32 x 1.73 x 12.80 in) |
| Weight |
5900 g |
| Installation |
19’’ rack mounting |
| • Environmental Limits |
| Operating Temperature |
-40 to 85°C (-40 to 185°F), cold start requires min. of 100 VAC at -40°C |
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity |
5 to 95% (non-condensing) |
| • Standards and Certifications |
| Safety |
UL 60950-1 |
| EMI |
FCC Part 15 Subpart B Class A, EN 55022 Class A |
| Power Automation |
IEC 61850-3, IEEE 1613 |
| Traffic Control |
NEMA TS2 |
| Rail Traffic |
EN 50155*, EN 50121-4 |
| Note |
*Complies with a portion of EN 50155 specifications. Please contact Moxa or a Moxa distributor for details. |
|
|
