|
|
PWR-105-HV-I - Power module for with 110/220 VDC/VAC single input, 88 to 300 VDC or 85 to 264 VAC operating voltage by MOXA
|
|
|
PWR-105-HV-I_SUMMARY.html
- Rotatable design for versatile installation
- Wide range of power input options for flexible deployment
|
|
|
PWR-105-HV-I_DESCRIPTION.html
The PWR-100 Power Module Series are designed for Moxa's
EDS-4000/G4000 Series switches. The power modules allow supported
switches to use 12/24/48 VDC or 110/220 VDC/VAC.
PWR-105-HV-I.html
Power Parameters
-
Note
- The EDS-4000/G4000 Series device model name and power parameters are determined by the installed
PWR-100 power module.
PWR-100-LV: -LV/-LV-T models PWR-105-HV-I: -HV/-HV-T
models PWR-101-LV-BP-I: -LVA/-LVA-T models (PoE support) PWR-103-LV-VB-I: -LVB/-LVB-T
models (PoE support)
For example: EDS-G4008-T + PWR-100-LV =
EDS-G4008-LV-T EDS-G4008-T + PWR-105-HV-I = EDS-G4008-HVT
If you install a different
power module, refer to the specifications of the corresponding model. For example, if you
replace the power module of the EDS-G4008-LV-T with the PWR-105-HV-I, refer to the
specifications of the EDS-G4008-HV-T.
Power over Ethernet: Only the
EDS-4008-4P-2GT-2GS(-T), EDS-4012-8P-4GS(-T), and EDS-G4012-8P-4QGS(-T) models support PoE. If a
PoE-capable PWR-100 Series module (PWR-101-LV-BP-I, PWR-103-LV-VB-I) is installed into an
EDS-4000/G4000 Series non-PoE model, PoE functionality will not be available.
-
Connection
- 2 removable 4-contact terminal block(s)
-
Input Voltage
-
Operating Voltage
- 88 to 300 VDC, 85 to 264 VAC
-
Input Current
- 110 to 220 VAC, 50 to 60 Hz, 0.30 to 0.20 A or 110 to 220 VDC, 0.30 to 0.20 A
-
No. of Power Inputs
-
Overload Current Protection
-
Reverse Polarity Protection
Physical Characteristics
-
Dimensions
- 103 x 98 x 39.9 mm (4.06 x 3.86 x 1.57 in)
-
Weight
Environmental Limits
-
Operating Temperature
- The operating temperature is dependent on the EDS-4000/G4000 switch the module is installed in.
Please refer to the respective EDS-4000/G4000 Series datasheet for more information.
-
Storage Temperature
-
Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
-
Safety
-
EMI
- FCC Part 15 Subpart B Class A
-
EMC
- EN 55032/35
EN 61000-6-2/-6-4
-
EMS
- EN 61000-4-2 (ESD) Level 4
EN 61000-4-3 (RS) Level 3 EN 61000-4-4 (EFT) Level 4 EN
61000-4-5 (Surge) Level 4 EN 61000-4-6 (CS) Level 3 EN 61000-4-8 Level 4
-
Vibration
|
|