Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
07017520 IDS-710-C2MS05D - 10-port Gigabit DIN Rail Switches with fixed fiber by PERLE

07017520 IDS-710-C2MS05D - 10-port Gigabit DIN Rail Switches with fixed fiber
by PERLE

Write a review Write a review
07017520_SUMMARY.html
  • 8 x 10/100/1000Mbps RJ45 Ethernet Ports
  • 2 x Gigabit (1000Mbps) SC/ST Fiber ports
  • PROFINET and Modbus TCP protocols are supported for monitoring and device management
  • Ring Protocol MRP (IEC 62439-2) has <10ms recovery time
  • STP/RSTP/MSTP for network redundancy
  • Advanced Security and IT management features: TACACS+, RADIUS, 802.1x, SSH, SNMPv3, and HTTPS
  • EEE 1588 V1 and V2 PTP for microsecond accuracy
  • Advanced protocols to optimize the performance and intelligence of the network: IGMP Snooping, LLDP-MED, GVRP, Voice VLANs, MSTP, GMRP, and IPv6 MLD Snooping
Mfg SKU # : 07017520
List Price : $1,936.00
Our Price : $1,646.00
Stock : 48
Quantity :
07017520_DESCRIPTION.html

The 07017520 is a ten-port Managed Ethernet Switch that can operate in industrial environments, providing advanced performance and enabling real-time deterministic network operation. Eight 10/100/1000-Base-T Ethernet ports are available for networking Gigabit and Fast Ethernet devices. The two 1000Base-X fiber connectors can extend Gigabit Ethernet operating distances over fiber up to 160km (100 miles).

Using fiber is essential in settings that frequently experience high electromagnetic interference (EMI), such as industrial plants. This interference can cause data corruption over copper-based Ethernet links. However, data transmitted over fiber optic cable is immune to this noise ensuring optimal data transmission across the plant floor.

Perle Industrial-grade Ethernet Switches are designed to withstand extreme temperatures, surges, vibrations, and shocks in industrial automation, government, military, oil and gas, mining, and outdoor applications. These rugged fanless switches are hardened to provide superior reliability in -10 to 60°C.Or choose the IDS-710-XT, where every component has been designed and tested to handle operating temperatures between -40 and 70°C.

With over 20 models, the Perle IDS-710CT offers an extensive choice of connectors, fiber types, temperature support, and operating distances. The simple Plug and Play installation in Perle's Fast Setup feature gets your Ethernet devices networked immediately. The familiar Command Line Interface (CLI), via in-band Telnet or the out-band serial console port, will be appreciated by CCNA (Cisco Certified Network Associate) and CCNP (Cisco Certified Network Professional) trained engineers.

The IDS-710 Managed Switches possess top-notch features suitable for enterprise environments that require extensive security, QoS, and network integration functionalities. They can be managed with an IPv6 address and supports a comprehensive set of management functions, including MRP (IEC62439-2), PROFINET, Modbus TCP, management VLAN, Management Access Lists, Password Strength requirements, RMON, N:1 port mirroring, and local alert log.

All Perle Industrial Ethernet Switches only use high-end components from the leading chip manufacturers to ensure the highest durability and reliability. In addition, all units have a corrosion-resistant aluminum case and dual redundant power input with reverse polarity and overload protection.

Perle has been designing industrial hardware since 1976. We used this expertise to develop the toughest Ethernet switches on the market that will keep your system running for years.

IDS-710CT Industrial Managed DIN Rail Switch Features

Simple deployment

Zero-touch discovery using Dynamic Host Control Protocol (DHCP), Perle's "Fast Setup" for first time installation, provides simple deployment in Ethernet environments

Security

802.1X, port security, Secure Shell (SSHv2); SNMPv3 provides encrypted administrator traffic during CLI and SNMP sessions; TACACS+ and RADIUS authentication facilitate centralized control and restrict unauthorized users.

Resiliency

  • STP, RSTP and MSTP protocols for fast recovery.
  • MRP (IEC 62439-2) for fast convergence in industrial ring networks. Prevents a switch loop scenario with recovery time of 10 ms or better.
  • Perle's P-Ring protocol for configuring a ring network using standard spanning tree protocols.
  • Link Standby is a link recovery feature for two links that provides a simple alternative to spanning tree protocols for link redundancy
  • Buffered Real Time Clock backup

Manageability

  • Web Device Manager, Telnet/SSH, HTTPS access, SNMP and Perle's PerleView NMS for centralized management
  • In-band management via RJ45 or USB serial port
  • Use an IPv4 or IPv6 address
  • Removable MicroSD flash for configuration files and firmware backup and restoration

Industrial Ethernet Protocol Support

Manage Perle IDS-710 switches via PLC, NMS, HMI or SCADA systems using PROFINET or Modbus TCP.

Rugged design for harsh environments

  • Corrosion resistant case
  • Programmable Controller Safety certified
  • Extended industrial temperature models

Reliable operation

  • Fan-less, no moving parts
  • Dual power input. Connect to separate power sources for redundancy.
    • Reverse polarity protection
    • Overload current protection
  • Handles vibration and shock conditions found in industrial environments

Real-time Ethernet performance

  • Fast wire-speed , store and forward switching
  • Auto-sensing for speed and duplex
  • Auto-mdi/mdix-crossover works with straight and crossover cables
Power
Dual Power Input

Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch.

12/24/48 VDC Nominal. (9.6 to 60 VDC)

Common negative

Power & Alarm Connector

8-Pin Removable Terminal Block.

Grounding screw on metal chassis

Maximum Current Consumption @24 vDC

0.25 amps

Maximum Power Consumption @24 vDC

6 watts

Overload Current Protection

Fused overload current protection

Reverse polarity protection

The positive and negative inputs can be reversed providing safe and simple power connectivity.

Access Ports
USB Serial Console port

MicroUSB Type B female port for serial console management. Used as an alternative port for out-of-band management connections

RJ45
  • 8 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
  • Auto-negotiation
  • Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
  • Ethernet isolation 1500 V
Gigabit Fiber Port
  • Duplex SC or ST connector
    • Multimode 50/125 or 62.5/125 micron fiber cable
    • Single mode 9/125 micron fiber cable
  • Simplex (BIDI, single strand) SC connector
    • Multimode 50/125 or 62.5/125 micron fiber cable
    • Single mode 9/125 micron fiber cable
  • PC and UPC type patch cords supported.
Alarm Relay
  • NO (Normally Open) dry contact.
  • 1A @ 24V
Switch Properties
Microprocessor Frequency

ARM Cortex A8 600MHZ

RAM & Flash

4GB DDR3 & 4GB eMMC

Standards
  • IEEE 802.3 for 10Base-T and 2500Base-T
  • IEEE 802.3ab for 1000Base-T
  • IEEE 802.3z for 1000BaseX and 2500BaseX
  • IEEE 802.3u for 100Base-TX and 100Base-FX
  • Energy Efficient Ethernet (EEE) as per 802.3az.
  • IEEE 802.3x for Flow Control
  • IEEE 1588 – 2008 (in software only)
  • 802.1x
Processing Type

Store and Forward

MAC Address Table Size

8K

VLAN ID range

1 to 4000

IGMP groups

1024

Packet Buffer Memory

1 Mbit

Jumbo Frame Size

10 KB

Indicators
System

Indicates whether the switch O/S is operating normally

RJ45 Ethernet

These integrated colored LEDs indicate link, activity and speed for each port.

Fiber Link

Fiber link LED indicates Link and Data Activity

Alarm

The alarm LED (Red) will be turned on under alarm conditions

Reset

Once pushed all 4 LEDs are solid Red for 3 seconds

Environmental Specifications
MTBF

250009 Hours

Calculation model based on MIL-HDBK-217-FN2 @ 30°C

Operating Temperature Ranges
  • IDS-710: -10°C to 60°C (14°F to 140°F).
  • IDS-710-XT: -40°C to 70°C (-40°F to 158°F)
Storage Temperature Range

-40°C to 85°C (-40°F to 185°F)

Operating Humidity Range

5% to 90% non-condensing

Storage Humidity Range

5% to 95% non-condensing

Maximum Heat Output

27 Btu/hr

Operating Altitude

Up to 3,048 meters (10,000 feet)

Chassis

Metal with an IP20 ingress protection rating

Din Rail Mountable

DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.

Removable to accommodate optional Panel/Wall mount kit

Product Weight and Dimensions
Weight

0.35 kg / 0.77 lb

Dimensions (W x H x D)

45 x 93 x 109 mm / 1.77 x 3.66 x 4.29 in

Packaging
Shipping Weight

0.50 kg / 1.1 lb

Shipping Dimensions

25 x 17 x 7 cm / 9.84 x 6.7 x 2.75 in

Standards and Certifications
Laser Safety
  • EN 60825-1
  • Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11.
Safety
  • CE Mark
  • UL/IEC 61010-1 and UL/IEC 61010-2
  • UL/EN/IEC 62368-1
  • CAN/CSA C22.2 No. 62368-1
Emissions
  • FCC 47 Part 15 Class A, EN55032 (CISPR32) Class A
  • ICES-003
  • EN61000-6-4 (Emissions for industrial environments)
  • CISPR 32:2015/EN 55032:2015 (Class A)
  • CISPR 24:2010/EN 55024:2010
  • EN61000-3-2
EMC and Immunity
  • CISPR 24 / EN55024
  • CISPR 32 / EN55032
  • IEC/EN 61000-4-2 (ESD) : Contact discharge +/- 4kv, Air discharge +/- 8kv
  • IEC/EN 61000-4-3 (RS) : 80mhz to 16hz ; 20v/m, 1.5hkz to 2.0ghz ; 10 v/m, 2.0ghz to 2.7 ghz ; 5 v/m
  • IEC/EN 61000-4-4 (EFT) : DC power line +/- 2kv, data line +/- 1kv
  • IEC/EN 61000-4-5 (Surge) : DC power line, Line/Line +/- 1kv, Line/Earth +/- 2kv, data line /earth +/- 2kv
  • IEC/EN 61000-4-6 (CS) :150mhz-80mhz 10vrms
  • IEC/EN 61000-4-8 (Magnetic Field) :30 A/M
  • EN 61000-4-11
  • IEC/EN 61000-6-2 (General Immunity in Industrial Environments)
Environmental

Reach, RoHS and WEEE Compliant

Other
  • ECCN: 5A992
  • HTSUS Number: 8517.62.0020
Contents Shipped
  • Industrial Ethernet Switch with DIN Rail attachment
  • Terminal block
  • Installation guide

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.