|
|
07017580 IDS-710-T2MD2 - 10-port Gigabit DIN Rail Switches with fixed fiber by PERLE
|
|
|
07017580_SUMMARY.html
- 8 x 10/100/1000Mbps RJ45 Ethernet Ports
- 2 x Gigabit
(1000Mbps) SC/ST Fiber ports
- PROFINET and Modbus TCP protocols are supported for
monitoring and device management
- Ring Protocol MRP
(IEC 62439-2) has <10ms recovery time
- STP/RSTP/MSTP for network redundancy
-
Advanced Security and IT management features: TACACS+, RADIUS, 802.1x, SSH, SNMPv3, and
HTTPS
- EEE 1588 V1 and V2 PTP for microsecond
accuracy
- Advanced protocols to optimize
the performance and intelligence of the network: IGMP Snooping, LLDP-MED, GVRP, Voice VLANs, MSTP, GMRP, and
IPv6 MLD Snooping
|
|
|
07017580_DESCRIPTION.html
The 07017580 is a ten-port Managed Ethernet Switch that can operate in industrial environments,
providing advanced performance and enabling real-time deterministic network operation. Eight 10/100/1000-Base-T
Ethernet ports are available for networking Gigabit and Fast Ethernet devices. The two 1000Base-X fiber
connectors can extend Gigabit Ethernet operating distances over fiber up to 160km (100 miles).
Using fiber is essential in settings that frequently experience high
electromagnetic interference (EMI), such as industrial plants. This interference can cause data corruption over
copper-based Ethernet links. However, data transmitted over fiber optic cable is immune to this noise ensuring
optimal data transmission across the plant floor.
Perle Industrial-grade Ethernet Switches are
designed to withstand extreme temperatures, surges, vibrations, and shocks in industrial automation, government,
military, oil and gas, mining, and outdoor applications. These rugged fanless switches are hardened to provide
superior reliability in -10 to 60°C.Or choose the IDS-710-XT, where every component has been designed and
tested to handle operating temperatures between -40 and 70°C.
With over 20 models,
the Perle IDS-710CT offers an extensive choice of connectors, fiber types, temperature support, and operating
distances. The simple Plug and Play installation in Perle's Fast Setup feature gets your Ethernet devices
networked immediately. The familiar Command Line Interface (CLI), via in-band Telnet or the out-band serial
console port, will be appreciated by CCNA (Cisco Certified Network Associate) and CCNP (Cisco Certified Network
Professional) trained engineers.
The IDS-710 Managed Switches possess top-notch features suitable
for enterprise environments that require extensive security, QoS, and network integration functionalities. They
can be managed with an IPv6 address and supports a comprehensive set of management functions, including MRP
(IEC62439-2), PROFINET, Modbus TCP, management VLAN, Management Access Lists, Password
Strength requirements, RMON, N:1 port mirroring, and local alert log.
All Perle Industrial
Ethernet Switches only use high-end components from the leading chip manufacturers to ensure the highest
durability and reliability. In addition, all units have a corrosion-resistant aluminum case and dual redundant
power input with reverse polarity and overload protection.
Perle has been designing industrial hardware
since 1976. We used this expertise to develop the toughest Ethernet switches on the market that will keep your
system running for years.
IDS-710CT Industrial Managed DIN Rail Switch Features
Simple deployment
|
Zero-touch discovery using Dynamic Host Control Protocol
(DHCP), Perle's "Fast Setup" for first time installation, provides simple deployment in Ethernet
environments |
Security
|
802.1X, port security, Secure Shell (SSHv2); SNMPv3 provides encrypted
administrator traffic during CLI and SNMP sessions; TACACS+ and RADIUS authentication facilitate
centralized control and restrict unauthorized users. |
Resiliency
|
- STP, RSTP and MSTP protocols for fast recovery.
- MRP
(IEC 62439-2) for fast convergence in industrial
ring networks. Prevents a switch loop scenario with recovery time of 10 ms or better.
- Perle's P-Ring protocol for configuring a ring network
using standard spanning tree protocols.
- Link Standby is a link recovery feature
for two links that provides a simple alternative to spanning tree protocols for link
redundancy
- Buffered Real Time Clock backup
|
Manageability
|
- Web Device Manager, Telnet/SSH, HTTPS
access,
SNMP and Perle's PerleView NMS for centralized management
- In-band management via RJ45 or USB serial port
- Use an IPv4 or IPv6 address
- Removable MicroSD flash for configuration files and firmware backup and restoration
|
Industrial Ethernet Protocol Support
|
Manage Perle IDS-710 switches via PLC, NMS, HMI or SCADA systems using PROFINET or Modbus TCP.
|
Rugged
design for harsh environments
|
- Corrosion resistant case
- Programmable Controller Safety certified
-
Extended industrial temperature models
|
Reliable operation
|
- Fan-less,
no moving parts
- Dual power
input. Connect to separate power sources for redundancy.
- Reverse polarity protection
- Overload current protection
- Handles vibration and shock conditions found in industrial environments
|
Real-time Ethernet performance
|
- Fast wire-speed , store and forward switching
- Auto-sensing for speed and duplex
- Auto-mdi/mdix-crossover works with straight and crossover cables
|
| Power |
---|
Dual Power Input |
Both inputs draw power simultaneously. If one power source fails, the other
live source can, acting as a backup, supply enough power to meet the operational needs of the
switch.
12/24/48 VDC Nominal. (9.6 to 60 VDC)
Common
negative
|
Power & Alarm Connector |
8-Pin Removable Terminal Block.
Grounding
screw on metal chassis
|
Maximum
Current Consumption @24 vDC |
0.25 amps
|
Maximum Power Consumption @24 vDC |
6 watts
|
Overload Current Protection |
Fused overload current protection
|
Reverse polarity
protection |
The positive and negative inputs can be
reversed providing safe and simple power connectivity.
|
| Access Ports |
---|
USB Serial Console port
|
MicroUSB Type B female port for serial console management.
Used as an alternative port for out-of-band management connections
|
RJ45 |
- 8 shielded RJ45 ports for 10/100/1000Base-T up to 100 meters (328 ft)
- Auto-negotiation
- Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
- Ethernet isolation 1500 V
|
Gigabit Fiber Port |
- Duplex SC or ST connector
- Multimode 50/125 or 62.5/125 micron fiber cable
- Single mode 9/125 micron fiber cable
- Simplex (BIDI, single strand) SC connector
- Multimode 50/125 or 62.5/125 micron fiber cable
- Single mode 9/125 micron fiber cable
- PC and UPC type patch cords supported.
|
| Alarm Relay |
---|
- NO (Normally Open) dry contact.
- 1A @ 24V
|
| Switch Properties |
---|
Microprocessor Frequency |
ARM Cortex A8 600MHZ
|
RAM & Flash |
4GB DDR3 & 4GB eMMC
|
Standards |
- IEEE 802.3 for 10Base-T and 2500Base-T
- IEEE 802.3ab for 1000Base-T
- IEEE 802.3z for 1000BaseX and 2500BaseX
- IEEE 802.3u for 100Base-TX and 100Base-FX
- Energy Efficient Ethernet (EEE) as per 802.3az.
- IEEE 802.3x for Flow Control
- IEEE 1588 – 2008 (in software only)
- 802.1x
|
Processing Type |
Store and
Forward
|
MAC Address Table Size |
8K
|
VLAN ID range |
1 to 4000
|
IGMP
groups |
1024
|
Packet Buffer Memory |
1
Mbit
|
Jumbo Frame Size |
10 KB
|
| Indicators |
---|
System |
Indicates whether the switch O/S is operating normally
|
RJ45
Ethernet |
These integrated colored LEDs indicate link,
activity and speed for each port.
|
Fiber Link |
Fiber link LED indicates Link and Data Activity
|
Alarm |
The alarm LED (Red) will be turned on under alarm conditions
|
Reset |
Once pushed all 4
LEDs are solid Red for 3 seconds
|
| Environmental Specifications |
---|
MTBF |
250009 Hours
Calculation model based on
MIL-HDBK-217-FN2 @ 30°C
|
Operating
Temperature Ranges |
- IDS-710: -10°C to 60°C (14°F to 140°F).
- IDS-710-XT: -40°C to 70°C (-40°F to 158°F)
|
Storage Temperature Range |
-40°C to 85°C (-40°F to 185°F)
|
Operating Humidity Range |
5% to 90% non-condensing
|
Storage Humidity
Range |
5% to 95% non-condensing
|
Maximum
Heat Output |
27 Btu/hr
|
Operating
Altitude |
Up to 3,048 meters (10,000 feet)
|
Chassis |
Metal with an IP20
ingress protection rating
|
Din Rail Mountable |
DIN Rail attachment included. Mounts to standard 35 mm DIN rail in
accordance with DIN EN 60175.
Removable to accommodate optional Panel/Wall
mount kit
|
| Product Weight and Dimensions |
---|
Weight |
0.35 kg / 0.77 lb
|
Dimensions (W x H x D) |
45
x 93 x 109 mm / 1.77 x 3.66 x 4.29 in
|
| Packaging |
---|
Shipping Weight |
0.50 kg / 1.1 lb
|
Shipping Dimensions |
25 x 17 x 7 cm / 9.84 x 6.7 x 2.75 in
|
|
Standards and Certifications |
---|
Laser Safety |
- EN 60825-1
- Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825
FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11.
|
Safety |
- CE Mark
- UL/IEC 61010-1 and UL/IEC 61010-2
- UL/EN/IEC 62368-1
- CAN/CSA C22.2 No. 62368-1
|
Emissions |
- FCC 47 Part 15 Class A, EN55032 (CISPR32) Class A
- ICES-003
- EN61000-6-4 (Emissions for industrial environments)
- CISPR 32:2015/EN 55032:2015 (Class A)
- CISPR 24:2010/EN 55024:2010
- EN61000-3-2
|
EMC and Immunity |
- CISPR 24 / EN55024
- CISPR 32 / EN55032
- IEC/EN 61000-4-2 (ESD) : Contact discharge +/- 4kv, Air discharge +/- 8kv
- IEC/EN 61000-4-3 (RS) : 80mhz to 16hz ; 20v/m, 1.5hkz to 2.0ghz ; 10 v/m, 2.0ghz to 2.7 ghz
; 5 v/m
- IEC/EN 61000-4-4 (EFT) : DC power line +/- 2kv, data line +/- 1kv
- IEC/EN 61000-4-5 (Surge) : DC power line, Line/Line +/- 1kv, Line/Earth +/- 2kv, data line
/earth +/- 2kv
- IEC/EN 61000-4-6 (CS) :150mhz-80mhz 10vrms
- IEC/EN 61000-4-8 (Magnetic Field) :30 A/M
- EN 61000-4-11
- IEC/EN 61000-6-2 (General Immunity in Industrial Environments)
|
Environmental |
Reach, RoHS and WEEE Compliant
|
Other
|
- ECCN: 5A992
- HTSUS Number: 8517.62.0020
|
Contents Shipped |
- Industrial Ethernet Switch with DIN Rail attachment
- Terminal block
- Installation guide
|
|
|