EDS-G4012-4GC-HV-T - Managed Full Gigabit Ethernet switch with 8 10/100/1000BaseT(X) ports
by MOXA

The EDS-G4012-4GC-HV-T, EDS-G4012 Series is equipped with 12 Gigabit Ethernet ports and up to four 1 Gbps or 2.5 Gbps fiber-optic ports, making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone. Gigabit transmission speed increases bandwidth for higher performance and transfers large amounts of triple-play services across a network quickly. This Series also comes with eight 10/100/1000BaseT(X) 802.3af (PoE), 802.3at (PoE+), and 802.3bt-compliant Ethernet port options to connect high-bandwidth PoE devices.

Redundant Ethernet technologies such as Turbo Ring, Turbo Chain, and RSTP/STP increase the reliability of your system and improve the availability of your network backbone. The EDS-G4012 Series is designed specifically for demanding applications such as video and process monitoring, ITS, and DCS systems, all of which can benefit from a scalable backbone construction.

The EDS-G4012 Series is compliant with the IEC 62443-4-2 and IEC 62443-4-1 Industrial Cybersecurity certifications, which cover both product security and secure development life-cycle requirements, helping our customers meet the compliance requirements of secure industrial network design.

Ethernet Interface

• 10/100/1000BaseT(X) Ports (RJ45 connector)

  EDS-G4012-4GC-HV/-LV/-T models: 8
  Auto MDI/MDI-X connection
  Auto negotiation speed
  Full/Half duplex mode

• Combo Ports (10/100/1000BaseT(X) or 100/1000BaseSFP)

  EDS-G4012-4GC-LV/-HV/-T models: 4

• PoE Ports (10/100/1000BaseT(X), RJ45 connector)

  EDS-G4012-8P-4QGS-LVA/-LVB/-T models: 8

• 1000/2500BaseSFP Ports

  EDS-G4012-8P-4QGS-LVA/-LVB/-T models: 4

• Standards

  IEEE 802.3 for 10BaseT
  IEEE 802.3u for 100BaseT(X) and 100BaseFX
  IEEE 802.3ab for 1000BaseT(X)
  IEEE 802.3z for 1000BaseX
  IEEE 802.3bz for 2.5GBaseX
  IEEE 802.3x for flow control
  IEEE 802.3ad for Port Trunk with LACP
  IEEE 802.1Q for VLAN Tagging
  IEEE 802.1D-2004 for Spanning Tree Protocol
  IEEE 802.1w for Rapid Spanning Tree Protocol
  IEEE 802.1p for Class of Service
  IEEE 802.1X for authentication

Ethernet Software Features

• Filter

  GMRP, GVRP, GARP, 802.1Q VLAN, IGMP Snooping v1/v2/v3, IGMP Querier

• Management

  IPv4/IPv6, Flow control, Back Pressure Flow Control, DHCP Server/Client, ARP, RARP, LLDP, Port Mirror, Linkup Delay, SMTP, SNMP Trap, SNMP Inform, SNMPv1/v2c/v3, RMON, TFTP, SFTP, HTTP, HTTPS, Telnet, Syslog, Private MIB

• MIB

  P-BRIDGE MIB, Q-BRIDGE MIB, IEEE8021-SPANNING-TREE-MIB, IEEE8021-PAE-MIB, IEEE8023-LAG-MIB, LLDP-EXT-DOT1-MIB, LLDP-EXT-DOT3-MIB, SNMPv2-MIB, RMON MIB Groups 1, 2, 3, 9

• Redundancy Protocols

  STP, RSTP, Turbo Ring v2, Turbo Chain, Ring Coupling, Dual-Homing, Link Aggregation

• Security

  Broadcast storm protection, Rate Limit, Trust access control, Static Port Lock, MAC Sticky, HTTPS/SSL, SSH, RADIUS, TACACS+, Login and Password Policy

• Time Management

  SNTP, NTP Server/Client, NTP Authentication

• Protocols

  IPv4/IPv6, TCP/IP, UDP, ICMP, ARP, RARP, TFTP, DNS, NTP Client, DHCP Server, DHCP Client, 802.1X, QoS, HTTPS, HTTP, Telnet, SMTP, SNMPv1/v2c/v3, RMON, Syslog

Switch Properties

• MAC Table Size

  16 K

• Jumbo Frame Size

  9.216 KB

• Max. No. of VLANs

  256

• VLAN ID Range

  VID 1 to 4094

• IGMP Groups

  512

• Priority Queues

  4

• Packet Buffer Size

  1 MB

LED Interface

• LED Indicators

  PWR1, PWR2, STATE, FAULT, MSTR/HEAD, CPLR/TAIL, SYNC

Serial Interface

• Console Port

  RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

USB Interface

• USB Connector

  USB Type A (Reserved)

Input/Output Interface

• Alarm Contact Channels

  1, Relay output with current carrying capacity of 1 A @ 24 VDC

• Digital Input Channels

  1

• Digital Inputs

  +13 to +30 V for state 1
  -30 to +3 V for state 0
  Max. input current: 8 mA

• Buttons

  Reset button

DIP Switch Configuration

• DIP Switches

  Turbo Ring, Master, Coupler, Reserve

Power Parameters

• Connection

  2 removable 4-contact terminal block(s)

• Pre-installed Power Module

  -LV/-LV-T models: PWR-100–LV
  -HV/-HV-T models: PWR-105-HV-I
  -LVA/-LVA-T models: PWR-101-LV-BP-I
  -LVB/-LVB-T models: PWR-103-LV-VB-I

• Note

  The EDS-G4012 Series supports modular power supplies. The model names and power parameters are determined by the installed power module.
  
  For example:
  EDS-G4012-4GC-T + PWR-100–LV = EDS-G4012-4GC-LV-T
  EDS-G4012-4GC-T + PWR-105-HV-I = EDS-G4012-4GC-HV-T
  
  If you install a different power module, refer to the specifications of the corresponding model. For example, if you replace the power module of the EDS-G4012-4GC-LV-T with the PWR-105–HV-I, refer to the specifications of the EDS-G4012-4GC-HV-T.

• Input Voltage

  -LV/-LV-T models: 12/24/48 VDC, Redundant dual inputs
  -HV/-HV-T models: 110/220 VDC/VAC, Single input
  -LVA/-LVA-T models: 48 VDC, Redundant dual inputs
  -LVB/-LVB-T models: 12/24/48 VDC, Redundant dual inputs

• Operating Voltage

  -LV/-LV-T models: 9.6 to 60 VDC
  -HV/-HV-T models: 88 to 300 VDC, 85 to 264 VAC
  -LVA/-LVA-T models: 44 to 57 VDC (>52 VDC for PoE+ output recommended)
  -LVB/-LVB-T models: 12 to 57 VDC (>52 VDC for PoE+ output recommended)

• Input Current

  -LV/-LV-T models: 12-48 VDC, 1.50-0.40 A or 24 VDC, 0.70 A
  -HV/-HV-T models: 110-220 VAC, 50-60 Hz, 0.30-0.20 A or 110-220 VDC, 0.30-0.20 A
  -LVA/-LVA-T models: 48 VDC, 5.42 A
  -LVB/-LVB-T models: 12/48 VDC, 7.46/4.27 A or 24 VDC, 7.26 A

• Power Consumption (Max.)

  EDS-G4012-4GC-LV(-T) models: 12.68 W
  EDS-G4012-4GC-HV(-T) models: 15.8 W
  
  EDS-G4012-8P-4QGS-LVA(-T) models:
  Without PoE: 15.58 W
  With PoE: Max. 240 W for total PD power consumption @ 48 VDC input
  
  EDS-G4012-8P-4QGS-LVB(-T) models:
  Without PoE: 17.96 W
  With PoE:
  Max. 180 W for total PD power consumption @ 48 VDC input;
  Max. 150 W for total PD power consumption @ 24 VDC input;
  Max. 62 W for total PD power consumption @ 12 VDC input

• Max. PoE Power Output per Port

  90 W

• Overload Current Protection

  Supported

• Reverse Polarity Protection

  Supported

Physical Characteristics

• IP Rating

  IP40

• Dimensions

  55 x 140 x 122.5 mm (2.17 x 5.51 x 4.82 in)

• Weight

  EDS-G4012-4GC(-T) models: 881.5 g (1.94 lb)
  EDS-G4012-8P-4QGS(-T) models: 972 g (2.14 lb)

• Installation

  DIN-rail mounting, Wall mounting (with optional kit)

• Housing

  Metal

Environmental Limits

• Operating Temperature

  Standard Models: -10 to 60°C (14 to 140°F)
  Wide Temp. Models: -40 to 75°C (-40 to 167°F)

• Storage Temperature (package included)

  -40 to 85°C (-40 to 185°F)

• Ambient Relative Humidity

  5 to 95% (non-condensing)

Standards and Certifications

• Industrial Cybersecurity

  IEC 62443-4-1
  IEC 62443-4-2

• Safety

  UL 61010-2-201, EN 62368-1 (LVD)

• EMC

  EN 55032/35, EN 61000-6-2/-6-4

• EMI

  CISPR 32, FCC Part 15B Class A

• EMS

  IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
  IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
  IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
  IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
  IEC 61000-4-6 CS: 10 V
  IEC 61000-4-8 PFMF

• Vibration

  IEC 60068-2-6

• Shock

  IEC 60068-2-27

• Freefall

  IEC 60068-2-32

• Railway

  EN 50121-4

• Traffic Control

  NEMA TS2

MTBF

• Time

  EDS-G4012-4GC-HV/HV-T: 456,870 hrs
  EDS-G4012-4GC-LV/LV-T: 867,981 hrs
  EDS-G4012-8P-4QGS-LVA/LVA-T: 799,780 hrs
  EDS-G4012-8P-4QGS-LVB/LVB-T: 759,924 hrs

• Standards

  Telcordia SR332

EDS-G4012-4GC-HV-T.pdf

1,629 K