Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
ESWGP506-2SFP-T - 'Discontinued' - Ethernet Managed 4-port PoE+ 2SFP by Advantech/ B+B Smartworx

ESWGP506-2SFP-T - "Discontinued" - Ethernet Managed 4-port PoE+ 2SFP
by Advantech/ B+B Smartworx

Write a review Write a review
  • IEEE 802.3at/af PoE+ standard ports
  • Up to 30 watts output per PoE+ port
  • Smart PoE+ over current, over temp & short circuit protection
  • -40° to 85°C operating temperature range
  • Ring On redundant rapid recovery system, 15 mS
  • Rapid spanning tree protocol recover system
  • IGMP with query mode for multimedia application
  • Port mirroring for diagnostics
  • Industrial IP30 rated DIN rail enclosure
  • SFP slots for Gigabit Ethernet Fiber
  • Dual power inputs, 24 to 52 VDC
  • PoE+ port priority management


The ESWGP506-2SFP-T is a fully managed, full Gigabit PoE+ industrial switch, with four (4) 802.3 at compliant Ethernet ports. The switch provides up to 30 Watts of power per port. Two (2) gigabit SFP slots can be used for multiple applications at a single location to make better use of fiber infrastructure.

The ESWGP506-2SFP-T is perfect for high bandwidth applications such as CCTV and IEEE 802.11ac Wi-Fi, and where reliability and manageability are required in industrial or hard to reach places. With two (2) gigabit SFP slots this switch provides the flexibility and capability of redundancy and daisy chain networks.

Power over Ethernet PoE+ 802.3at provides 30W of power per port and is backwards compatible with devices. The switch detects and classifies a PD device before providing the required power to the PD device. PoE power simplifies the installation of PD devices by eliminating the need for additional cable and power supplies.

Advanced software controlled PoE+ port priority allows for better management of PD devices.

VLAN Configuration: A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. This allows you to isolate network traffic so that members of a VLAN will only receive traffic from other members of the same VLAN. Creating a VLAN from a switch is the logical equivalent of reconnecting a group of network devices to another Layer 2 switch. However, since it is a virtual network, the network devices remain physically connected to the same switch. Both port-based and 802.1Q (tagged-based) VLAN are supported.

RingOn Technology: Two ports can be used for network redundancy by implementing RingOn technology. This provides a rapid recovery system for industrial networks. If any part of the ring disconnects, the network communications will automatically be restored.

Wide Operating Temperature: With an operating temperature of -40 to 85°C (-40 to 185°F), this switch is suitable for use in some of the harshest industrial environments.


IEEE Standard

IEEE802.3af/at, 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1w, 802.1Q, 802.1p, 802.1D

Processing Type

Store and forward

MAC Address


Packet Buffer Size


Jumbo Frame Size

Supports up to 9720 bytes

Broadcast Storm Control

Automatic Broadcast Control

Flow Control

Full Duplex Flow Control, Half Duplex Back Pressure Control

Jumbo Frame Size

Supports up to 9720 bytes

Protocols and Functions

• RingOn™ Redundant Ring Technology: Recovery time less than15ms

• VLAN: Port Based VLAN, IEEE 802.1Q Tag VLAN

• Port Trunking

• Built-in Web Server, remote management and configuration through browser


• Quality of Service : Determined by port, tag(CoS), and IPv4 different service(DSCP)

• IGMP Snooping /GMRP

• Static MAC Address Forwarding

• SNMP V1/V2c/V3



• On-line Software Upgrading

• Automatic warning by exception through e-mail or relay output

• System Log

• DHCP Client

• Port Mirror: Supports TX, RX, and both packet

• Broadcast storm control and Port-Based traffic control

• IP Security: 10 IP address entries for permission to access management functions

• Advanced PoE management


RJ-45 Port

10/100/1000Base-T Auto-Negotiation, Full/Half Duplex, Auto-MDI/MDIX

Fiber Ports

SFP form factor for MSA-compliant Gigabit SFPs

PoE+ Pinout

V+, V+, V-, V-, for 1,2,3,6 Alternative A

Power Input Connection

Standard 4-pin dual power terminal blocks

Relay Output

Standard 2-pin terminal blocks

Console Port


DIP Switch



LED Indicators

P1, P2, 10/100/1000Mbps, POE+ (1~4)


Relay, Email


Input Voltage

24 to 52VDC redundant power inputs

Power Budget



Protection Level



45x145 x108 mm (WxHxD)


DIN Rail or Panel Mounting


Operating Temp

-40 to 85˚C

Ambient Relative Humidity

5 to 95% (Non-condensing)

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.