|
|
|
Advantech ESWGP506-2SFP-T - "Discontinued" - Ethernet Managed 4-port PoE+ 2SFP by Advantech
|
|
|
|
- IEEE 802.3at/af PoE+ standard ports
- Up to 30 watts output per PoE+ port
- Smart PoE+ over current, over temp & short circuit protection
- -40° to 85°C operating temperature range
- Ring On redundant rapid recovery system, 15 mS
- Rapid spanning tree protocol recover system
- IGMP with query mode for multimedia application
- Port mirroring for diagnostics
- Industrial IP30 rated DIN rail enclosure
- SFP slots for Gigabit Ethernet Fiber
- Dual power inputs, 24 to 52 VDC
- PoE+ port priority management
|
|
|
The ESWGP506-2SFP-T is a fully managed, full Gigabit PoE+ industrial switch, with four (4) 802.3 at compliant Ethernet ports. The switch provides up to 30 Watts of power per port. Two (2) gigabit SFP slots can be used for multiple applications at a single location to make better use of fiber infrastructure.
The ESWGP506-2SFP-T is perfect for high bandwidth applications such as CCTV and IEEE 802.11ac Wi-Fi, and where reliability and manageability are required in industrial or hard to reach places. With two (2) gigabit SFP slots this switch provides the flexibility and capability of redundancy and daisy chain networks.
Power over Ethernet PoE+ 802.3at provides 30W of power per port and is backwards compatible with 802.3.af devices. The switch detects and classifies a PD device before providing the required power to the PD device. PoE power simplifies the installation of PD devices by eliminating the need for additional cable and power supplies.
Advanced software controlled PoE+ port priority allows for better management of PD devices.
VLAN Configuration: A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. This allows you to isolate network traffic so that members of a VLAN will only receive traffic from other members of the same VLAN. Creating a VLAN from a switch is the logical equivalent of reconnecting a group of network devices to another Layer 2 switch. However, since it is a virtual network, the network devices remain physically connected to the same switch. Both port-based and 802.1Q (tagged-based) VLAN are supported.
RingOn Technology: Two ports can be used for network redundancy by implementing RingOn technology. This provides a rapid recovery system for industrial networks. If any part of the ring disconnects, the network communications will automatically be restored.
Wide Operating Temperature: With an operating temperature of -40 to 85°C (-40 to 185°F), this switch is suitable for use in some of the harshest industrial environments.
TECHNOLOGY |
IEEE Standard |
IEEE802.3af/at, 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1w, 802.1Q, 802.1p, 802.1D |
Processing Type |
Store and forward |
MAC Address |
4k |
Packet Buffer Size |
128KB |
Jumbo Frame Size |
Supports up to 9720 bytes |
Broadcast Storm Control |
Automatic Broadcast Control |
Flow Control |
Full Duplex Flow Control, Half Duplex Back Pressure Control |
Jumbo Frame Size |
Supports up to 9720 bytes |
Protocols and Functions |
• RingOn™ Redundant Ring Technology: Recovery time less than15ms
• VLAN: Port Based VLAN, IEEE 802.1Q Tag VLAN
• Port Trunking
• Built-in Web Server, remote management and configuration through browser
• TFTP
• Quality of Service : Determined by port, tag(CoS), and IPv4 different service(DSCP)
• IGMP Snooping /GMRP
• Static MAC Address Forwarding
• SNMP V1/V2c/V3
• RSTP
• LLDP
• On-line Software Upgrading
• Automatic warning by exception through e-mail or relay output
• System Log
• DHCP Client
• Port Mirror: Supports TX, RX, and both packet
• Broadcast storm control and Port-Based traffic control
• IP Security: 10 IP address entries for permission to access management functions
• Advanced PoE management |
INTERFACE |
RJ-45 Port |
10/100/1000Base-T Auto-Negotiation, Full/Half Duplex, Auto-MDI/MDIX |
Fiber Ports |
SFP form factor for MSA-compliant Gigabit SFPs |
PoE+ Pinout |
V+, V+, V-, V-, for 1,2,3,6 Alternative A |
Power Input Connection |
Standard 4-pin dual power terminal blocks |
Relay Output |
Standard 2-pin terminal blocks |
Console Port |
RJ45 |
DIP Switch |
DIP 1- POE ON/OFF RESET
DIP 2 – POE AUTO RESET |
LED Indicators |
P1, P2, 10/100/1000Mbps, POE+ (1~4) |
Alarm |
Relay, Email |
POWER |
Input Voltage |
24 to 52VDC redundant power inputs |
Power Budget |
135W |
PHYSICAL CHARACTERISTICS |
Protection Level |
IP30 |
Dimensions |
45x145 x108 mm (WxHxD) |
Installation |
DIN Rail or Panel Mounting |
ENVIRONMENTAL |
Operating Temp |
-40 to 85˚C |
Ambient Relative Humidity |
5 to 95% (Non-condensing) |
|
|
|
|