Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
IGPS-9084GP-LA - Industrial Slim 12-port Secured managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports an by ORing Industrial Networking

IGPS-9084GP-LA - Industrial Slim 12-port Secured managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports an
by ORing Industrial Networking

Write a review Write a review
  • Support O-Ring(recovery time < 30ms over 250 units of connection) andMSTP(RSTP/STP compatible) for Ethernet Redundancy
  • Open-Ringsupport the other vendors ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • Support standard IEC 62439-2 MRP*note (Media Redundancy Protocol) function
  • 8 port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per port
  • Support PoE on/off scheduled configuration
  • Support PoE alive check and auto reboot fuction
  • Support IPV6 new internet protocol version
  • Support EtherNet/IP' and Modbus TCP protocol
  • Support IEEE 802.3az Energy-Efficient Ethernet technology
  • Provided HTTPS/SSH protocol to enhance network security
  • Support SMTP client and NTP server protocol
  • Support IP-based bandwidth management
  • Support application-based QoS management
  • Support Device Binding security function
  • Support DOS/DDOS auto prevention
  • Support auto-negotiation and auto-MDI/MDIX
  • Support full and half duplex mode
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
  • Support ACL, TACACS+ and 802.1x User Authentication for security
  • Support 9.6K Bytes Jumbo Frame
  • Syslog/SNMP Trap notification for warning of unexpected event
  • Support DBU-01 backup unit device to quickly backup/restore configuration
  • Web-based ,SNMP v1/v2c/v3, Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
  • Support LLDP Protocol
  • Robust EMS design, provide 8K ESD and 4KV Surge protection
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled
  • PROFINET CC-B v2.40 certified and GSD file provided
  • Support PROFINET MRP client (MRC)
  • *NOTE: This function is available by request only
    Mfg SKU # : IGPS-9084GP-LA
    Our Price : $927.00

    IGPS-9084GP-LA is layer2 managed PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP-LA also support Power over Ethernet, a system to transmit electrical power up to 30 watts, total PoE power budget is 240W max, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-9084GP-LA switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. IGPS-9084GP-LA can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration.

    ORing Switch Model IGPS-9084GP-LA-PN
    Physical Ports
    10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX 8
    100/1000Base-X with SFP port 4
    Ethernet Standards IEEE 802.3 for 10Base-T
    IEEE 802.3u for 100Base-TX and 100Base-FX
    IEEE 802.3ab for 1000Base-T
    IEEE 802.3z for 1000Base-X
    IEEE 802.3x for Flow control
    IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
    IEEE 802.1p for COS (Class of Service)
    IEEE 802.1Q for VLAN Tagging
    IEEE 802.1D for STP (Spanning Tree Protocol)
    IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
    IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
    IEEE 802.1x for Authentication
    IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
    IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
    PoE Power Supply Type Endspan mode
    PoE Power Output Per port 56V DC, 350mA. Max. 15.4 watts (IEEE 802.3af),
    Per Port 56V DC, 590mA. Max. 30 watts (IEEE 802.3at)
    MAC Table 8K
    Priority Queues 8
    Processing Store-and-Forward
    Buffer Size 4Mbit
    Switch Properties Switching latency: 7 us
    Switching bandwidth: 24Gbps
    Throughput (packet per second) : 17.856Mpps@64Bytes packet
    Max. Number of Available VLANs: 4096
    VLAN ID Range : VID 0 to 4095
    IGMP multicast groups: 256 for each VLAN
    Port rate limiting: User Define
    Jumbo frame Up to 9.6K Bytes
    Security Featues Device Binding security feature
    Enable/disable ports, MAC based port security
    Port based network access control (802.1x)
    VLAN (802.1Q ) to segregate and secure network traffic
    Radius centralized password management
    SNMPv3 encrypted authentication and access security
    Https / SSH enhance network security
    Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
    Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
    TOS/Diffserv supported
    Quality of Service (802.1p) for real-time traffic
    VLAN (802.1Q) with VLAN tagging
    IGMP Snooping
    IP-based bandwidth management
    Application-based QoS management
    DOS/DDOS auto prevention
    Port configuration, status, statistics, monitoring, security
    DHCP Server/Client/Relay
    SMTP Client
    Modbus TCP
    NTP server
    Network Redundancy

    *note MRP
    MSTP (RSTP/STP compatible)

    PROFINET conformance class Conformance-class B
    RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1
    LED Indicators
    Power Indicator (PWR) Green : Power LED x 3
    Ring Master Indicator (R.M.) Green: Indicates that the system is operating in O-Ring Master mode
    O-Ring Indicator (Ring) Green : Indicates that the system operating in O-Ring mode
    Green Blinking : Indicates that the Ring is broken.
    Fault Indicator Amber : Indicate unexpected event occurred
    10/100/1000Base-T(X) RJ45 port Indicator Green for Port LINK/ACT indicator
    Dual color LED for speed indicator: Green for 1000Mbps / Amber for 100Mbps / off-light for 10Mbps
    100/1000Base-X SFP port Indicator Green for port Link/Act..
    PoE Indicator Green : PoE enabled LED x 8
    Fault contact
    Relay Relay output to carry capacity of 1A at 24VDC
    Reset Function
    Reset Button < 5 sec: System reboot, > 5 sec: Factory default
    Redundant Input Power 50/57VDC on 6-pin terminal block
    Power Consumption (Typ.) 13.2 Watts
    PoE budget 240W max, 30W/per port
    Overload Current Protection Present
    Reverse polarity protection Present
    Hi-POT 1.5KV AC
    Physical Characteristics
    Enclosure IP-30
    Dimensions (W x D x H) 54.3 (W) x 108.3 (D) x 145.1 (H) mm (2.13 x 4.26 x 5.71 inches)
    Weight (g) 779g
    Storage Temperature -40 to 85C (-40 to 185F)
    Operating Temperature -40 to 75C (-40 to 167F)
    Operating Humidity 5% to 95% Non-condensing
    Regulatory Approvals
    EMC CE EMC (EN 55024, EN 55032), FCC Part 15B
    EMI EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15B class A
    EMS EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)
    Shock IEC60068-2-27
    Free Fall IEC 60068-2-31
    Vibration IEC60068-2-6
    Safety EN60950-1
    MTBF 516416hrs

    Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.