Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
IGS-3044GC - *Discontinued* - Rugged 4x 10/100/1000TX (RJ-45) + 4x 100/1000 Combo(RJ45/SFP) support DDM by ORing Industrial Networking

IGS-3044GC - *Discontinued* - Rugged 4x 10/100/1000TX (RJ-45) + 4x 100/1000 Combo(RJ45/SFP) support DDM
by ORing Industrial Networking

Write a review Write a review
  • Fastest Redundant Ethernet Ring: O-Ring (recovery time < 20ms over 250 units of connection) 
  • Open-Ring support the other vendor's ring technology in open architecture 
  • STP/RSTP/MSTP supported 
  • Supports PTP Client (Precision Time Protocol) clock synchronization 
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic 
  • Port Trunking for easy of bandwidth management 
  • SNMP v1/v2c/v3 support for secured network management 
  • RMON for traffic monitoring 
  • Supports DDM (Digital Diagnostic Monitoring) function 
  • Supports LLDP (Link Layer Discovery Protocol) 
  • Event notification through Syslog, Email, SNMP trap, and Relay Output 
  • Port lock to prevent access from unauthorized MAC address 
  • Windows utility (Open-Vision) support centralized managementand configurable by Web-based ,Telnet, and Console (CLI) 
  • Supports eight Gigabit ports 
  • Rigid IP-30 housing design 
  • DIN-Rail and wall mounting enabled
IGS-3044GC is managed redundant ring Ethernet switch with 4x10/100/1000Base-T(X) and 4xGigabit Combo ports. With complete support of Ethernet redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/ D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGS-3044GC can be managed centralized and convenient by a powerful windows utility — Open-Vision. IGS-3044GC support new DDM (Digital Diagnostic Monitoring) function, which can monitor instantly the status of electrical voltage, current and temperature. The redundant DC power inputs guarantee a non-stop operation. The backup power input will take over immediately when the primary DC power input fails. IGS-3044GC provides relay outputs that can be set up to indicate events with urgency to notify or warn the technicians, so they can quickly respond to the message in priority. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.

Gigabit Combo Ports with 10/100/1000Base-T(X) and 100/1000Base-X SFP Port
4
Technology  
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging 
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switch Properties Switching latency : 7 μs 
Switching bandwidth : 16Gbps
Max. Number of Available VLANs : 4096
IGMP multicast groups : 1024 
Port rate limiting: User Define
Security Features Enable/disable ports MAC based port security 
Port based network access control (802.1x) 
VLAN (802.1Q ) to segregate and secure network traffic 
Supports Q-in-Q VLAN for performance & security to expand the VLAN 
Radius centralized password management 
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s) 
Redundant Ring (O-Ring) with recovery time less than 20ms over 250 
TOS/Diffserv supported 
Quality of Service (802.1p) for real-time traffic 
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security 
SNTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support Port Trunk support 
Port Trunk support  
MVR (Multicast VLAN Registration) support
Network Redundancy O-Ring 
Open-Ring 
STP 
RSTP 
MSTP
Warning / Monitoring System Relay output for fault event alarming 
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1
LED Indicators  
Power Indicator Green : Power LED x 3
R.M. Indicator Green : Indicates that the system is operating in O-Ring Master mode
Ring Indicator Green : Indicates that the system is operating in O-Ring mode
Fault Indicator Amber : Indicates unexpected event occurred
10/100/1000Base-T(X) RJ45 port Indicator Green for port Link/Act. Amber for 100Mbps indicator
100/1000Base-X SFP port Indicator Green for port Link/Act.
Fault Contact  
Relay Relay output to carry capacity of 1A at 24VDC
Power  
Redundant Input Power Dual DC inputs. 12~48 VDC on 6-pin terminal block
Power Consumption (Typ.) 22.8 Watts
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristics  
Enclosure IP-30
Dimensions (W x D x H) 74.3(W)x109.2(D)x153.6(H) mm (2.93x4.3x6.05 inch)
Weight (g) 1075g
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 214,978

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.