Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
IGS-9164GF-MM-SC - Rugged 16x 10/100/1000TX (RJ-45) + 4x 1000SX (Multi Mode) SC by ORing Industrial Networking

IGS-9164GF-MM-SC - Rugged 16x 10/100/1000TX (RJ-45) + 4x 1000SX (Multi Mode) SC
by ORing Industrial Networking

Write a review Write a review
  • Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
  • Open-Ring support the other vendor’s ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • Supports standard IEC 62439-2 MRP (Media Redundancy Protocol) function
  • Supports IEEE 1588v2 clock Synchronization
  • Supports IPV6 new internet protocol version
  • Supports Modbus TCP protocol
  • Provided HTTPS/SSH protocol to enhance network security
  • Supports IEEE 802.3az Energy-Efficient Ethernet technology
  • Supports SMTP client and NTP sever protocol
  • Supports IP-based bandwidth management
  • Supports application-based QoS management
  • Supports Device Binding security function
  • Supports DOS/DDOS auto prevention
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
  • Support ACL, TACACS+ and 802.1x User Authentication for security
  • Supports 9.6K Bytes Jumbo Frame
  • Multiple notification for warning of unexpected event
  • Supports “DBU-01” backup unit device for quickly configuration backup/restore
  • Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
  • Support LLDP Protocol
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled
IGS-9164GF series are managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4-port fixed optical fiber port.  IGS-9164GF provided 4x1000Base-X fiber ports and IGS-9164FX provided 4x100Base-FX fiber ports.  With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) /Open-Ring/O-Chain/MRP/Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.  And support wide operating temperature from -40 oC to 75 oC.  IGS-9164GF/FX series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration.  Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
         
Physical Ports        
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX

16

 
Fiber Ports Number

4

 
Fiber Ports Standard 1000Base-SX      
Fiber Mode Multi-mode      
Fiber Diameter (μm) 62.5/125 
50/125 μm
     
Fiber Optical Connector SC      
Typical Distance (km) 0.55 km      
Wavelength (nm) 850 nm      
Max. Output Optical Power (dBm) -4 dBm      
Min. Output Optical Power (dBm) -9.5 dBm      
Max. Input Optical Power(Saturation 0 dBm      
Min. Input Optical Power (Sensitivity) -18 dBm      
Link Budget (dB) 8.5 dB      
Technology        
  Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX 
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.3x for Flow control 
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) 
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging 
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) 
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8k
Priority Queues 8
Processing Store-and-Forward
Switch Properties Switching latency: 7 us
Switching bandwidth: 40Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Jumbo Frame up to 9.6K Bytes
Security Feature Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units 
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
Network Redundancy

O-Ring
Open-Ring
O-Chain
MRP
MSTP (RSTP/STP comtatible)
Fast Recovery

RS-232 Serial Console Port RS-232 in RJ45 connector with console cable.  115200bps, 8, N, 1
LED Indicators        
Power Indicator (PWR)(PWR1)(PWR2) Green : Power LED x 3
Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode
Fault Indicator (Fault) Amber : Indicate unexpected event occurred
O-Ring Indicator (Ring) Green : Indicates that the system operating in O-Ring mode 
Green Blinking : Indicates that the Ring is broken.
10/100/1000Base-T(X) RJ45 Port Indicator Green LED for Link/Act indicator.
Dual color LED for speed indicator : Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps indicator
1000Base-X Fiber Port Indicator
(IGS-9164GF series model only)
Green for port Link/Act.
100Base-FX Fiber Port Indicator (IGS-9164FX series model only) Green for port Link/Act.
Fault contact        
Relay Relay output to carry capacity of 1A at 24VDC
Power        
Redundant Input Power Dual DC inputs. 12~48VDC on 6-pin terminal block
Power Consumption (Typ.)

16.32 Watts

 
Overload Current Protection

Present

Reverse Polarity Protection

Present

Physical Characteristics        
Enclosure IP-30
Dimensions (W x D x H) 96.4 (W) x 105.5 (D) x 154 (H)mm (3.8 x 4.15 x 6.06 inch)
Weight (g) 1243 g  
Environmental        
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 75oC (-40 to 167oF )
Operating Humidity 5% to 95% Non-condensing  
Regulatory Approvals        
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD)
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.