Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
IGS-9844GPF-MM-SC - Rugged 8x 10/100/1000TX (RJ-45) + 4x 100/1000(SFP) + 4 x 1000X (Multi Mode) SC by ORing Industrial Networking

IGS-9844GPF-MM-SC - Rugged 8x 10/100/1000TX (RJ-45) + 4x 100/1000(SFP) + 4 x 1000X (Multi Mode) SC
by ORing Industrial Networking

Write a review Write a review
  • Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy 
  • Open-Ring support the other vendor’s ring technology in open architecture 
  • O-Chain allow multiple redundant network rings 
  • Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function 
  • Support IEEE 1588v2 clock Synchronization 
  • Supports IPV6 new internet protocol version 
  • Support Modbus TCP protocol 
  • Provided HTTPS/SSH protocol to enhance network security 
  • Support IEEE 802.3az Energy-Efficient Ethernet technology 
  • Supports SMTP client 
  • Supports IP-based bandwidth management 
  • Supports application-based QoS management 
  • Supports Device Binding security function 
  • Supports DOS/DDOS auto prevention 
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic 
  • Supports SNMP v1/v2c/v3, RMON and 802.1Q VLAN Network Management 
  • Support ACL, TACACS+ and 802.1x User Authentication for security 
  • Supports 9.6K Bytes Jumbo Frame 
  • Windows utility (Open-Vision) support centralized management and configurable by Web-based interface, Telnet and Console (CLI) 
  • Multiple notification for warning of unexpected event 
  • Support LLDP Protocol 
  • Rigid IP-30 housing design 
  • DIN-Rail and wall mounting enabled
IGS-9844GPF(X) series are managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports and 4x100/1000Base-X SFP ports and 4x100Base-FX (IGS-9844GPFX series) or 4x1000Base-X (IGS-9844GPF series) optical fiber port with SC connector. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 70 oC. IGS-9844GPF(X) series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
         
Physical Ports    
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX

8

100/1000Base-X with SFP port

4

Fiber Ports Number

4

Fiber Ports Standard 1000Base-SX      
Fiber Mode Multi-mode      
Fiber Diameter (μm) 62.5/125 μm
50/125 μm
     
Fiber Optical Connector SC      
Fiber Ports Specifications Typical Distance (km) 0.55 km      
Wavelength (nm) 850 nm      
Max. Output Optical Power (dBm) -4 dBm      
Min. Output Optical Power (dBm) -9.5 dBm      
Max. Input Optical Power(Saturation 0 dBm      
Min. Input Optical Power (Sensitivity) -18 dBm      
Link Budget (dB) 8.5 dB      
     
Technology    
  Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX 
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.3x for Flow control 
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) 
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging 
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) 
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switch Properties Switching latency : 7 μs 
Switching bandwidth : 32Gbps
Max. Number of Available VLANs : 256 
IGMP multicast groups : 128 for each VLAN 
Port rate limiting : User Define
Jumbo Frame up to 9.6K Bytes
Security Feature Enable/disable ports, MAC based port security 
Device Binding security feature 
Port based network access control (802.1x) 
VLAN (802.1q ) to segregate and secure network traffic 
Supports Q-in-Q VLAN for performance & security to expand the VLAN space 
Radius centralized password management 
SNMPV1/V2c/V3 encrypted authentication and access security 
Https / SSH enhance network security
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported 
Quality of Service (802.1p) for real-time traffic 
VLAN (802.1Q) with VLAN tagging
IGMP Snooping for multicast filtering 
IP-based bandwidth management 
Application-based QoS management 
DOS/DDOS auto prevention 
Port configuration, status, statistics, monitoring, security 
DHCP Server/Client/Relay
Modbus TCP
Network Redundancy

O-Ring
Open-Ring
O-Chain
MRP
MSTP (RSTP/STP comtatible)
Fast Recovery

Warning / Monitoring System Relay output for fault event alarming 
Syslog server / client to record and view events 
Include SMTP for event warning notification via email 
Event selection support
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. Baud rate setting: 115200bps, 8, N, 1
LED Indicators    
Power Indicator (PWR) Green : Power LED x 3
Fault Indicator (Fault) Amber : Indicate unexpected event occurred
R.M. Indicator (R.M) Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring) Green : Indicates that the system is operating in O-Ring mode
10/100/1000Base-T(X) RJ45 Port Indicator Green LED for 1000Mbps Link/Act indicator,  Amber LED for 10/100Mbps Link/Act indicator
100/1000Base-X SFP Port Indicator Green for port Link/Act.
100Base-FX or 1000Base-X Fiber Port Indicator Green for port Link/Act.
Fault contact    
Relay Relay output to carry capacity of 1A at 24VDC
Power    
Redundant Input Power Dual DC inputs. 12~48VDC on 6-pin terminal block
Power Consumption (Typ.)

15 watts

Overload Current Protection

Present

Reverse Polarity Protection

Present

Physical Characteristics    
Enclosure IP-30
Dimensions (W x D x H) 96.4 (W) x 105.5 (D) x 154 (H)mm (3.8 x 4.15 x 6.06 inch)
Weight (g) 1100 g
Environmental    
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing  
Regulatory Approvals    
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.