| |
|
|
|
|
| Physical Ports |
|
|
| 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX |
8 |
| 100/1000Base-X with SFP port |
4 |
| Fiber Ports Number |
4 |
| Fiber Ports Standard |
1000Base-LX |
|
|
|
| Fiber Mode |
Single-mode |
|
|
|
| Fiber Diameter (μm) |
9/125 μm |
|
|
|
| Fiber Optical Connector |
SC |
|
|
|
| Fiber Ports Specifications Typical Distance (km) |
10 km |
|
|
|
| Wavelength (nm) |
1310 nm |
|
|
|
| Max. Output Optical Power (dBm) |
-3 dBm |
|
|
|
| Min. Output Optical Power (dBm) |
-9.5 dBm |
|
|
|
| Max. Input Optical Power(Saturation |
-3 dBm |
|
|
|
| Min. Input Optical Power (Sensitivity) |
-20 dBm |
|
|
|
| Link Budget (dB) |
10.5 dB |
|
|
|
| |
|
|
| Technology |
|
|
| Ethernet Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
| MAC Table |
8192 MAC addresses |
| Priority Queues |
8 |
| Processing |
Store-and-Forward |
| Switch Properties |
Switching latency : 7 μs
Switching bandwidth : 32Gbps
Max. Number of Available VLANs : 256
IGMP multicast groups : 128 for each VLAN
Port rate limiting : User Define |
| Jumbo Frame |
up to 9.6K Bytes |
| Security Feature |
Enable/disable ports, MAC based port security
Device Binding security feature
Port based network access control (802.1x)
VLAN (802.1q ) to segregate and secure network traffic
Supports Q-in-Q VLAN for performance & security to expand the VLAN space
Radius centralized password management
SNMPV1/V2c/V3 encrypted authentication and access security
Https / SSH enhance network security |
| Software Features |
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping for multicast filtering
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
Modbus TCP |
| Network Redundancy |
O-Ring
Open-Ring
O-Chain
MRP
MSTP (RSTP/STP comtatible)
Fast Recovery |
| Warning / Monitoring System |
Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support |
| RS-232 Serial Console Port |
RS-232 in RJ45 connector with console cable. Baud rate setting: 115200bps, 8, N, 1 |
| LED Indicators |
|
|
| Power Indicator (PWR) |
Green : Power LED x 3 |
| Fault Indicator (Fault) |
Amber : Indicate unexpected event occurred |
| R.M. Indicator (R.M) |
Green : Indicates that the system is operating in O-Ring Master mode |
| O-Ring Indicator (Ring) |
Green : Indicates that the system is operating in O-Ring mode |
| 10/100/1000Base-T(X) RJ45 Port Indicator |
Green LED for 1000Mbps Link/Act indicator, Amber LED for 10/100Mbps Link/Act indicator |
| 100/1000Base-X SFP Port Indicator |
Green for port Link/Act. |
| 100Base-FX or 1000Base-X Fiber Port Indicator |
Green for port Link/Act. |
| Fault contact |
|
|
| Relay |
Relay output to carry capacity of 1A at 24VDC |
| Power |
|
|
| Redundant Input Power |
Dual DC inputs. 12~48VDC on 6-pin terminal block |
| Power Consumption (Typ.) |
15 watts |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present |
| Physical Characteristics |
|
|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
96.4 (W) x 105.5 (D) x 154 (H)mm (3.8 x 4.15 x 6.06 inch) |
| Weight (g) |
1100 g |
| Environmental |
|
|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-40 to 70°C (-40 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensing |
|
| Regulatory Approvals |
|
|
| EMI |
FCC Part 15, CISPR (EN55022) class A, |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
