|
|
|
EDS-82810G - Layer 3 modular managed Ethernet switch system with 6 slots for 4-port fast Ethernet interface modules and 2 slots
by MOXA
|
|
|
|
- Layer 3 switching functionality to move data and information across networks
- Command Line Interface (CLI) for quickly configuring major managed functions
- Supports advanced VLAN capability with Q-in-Q tagging
- Software-based IEEE 1588 PTPv2 (Precision Time Protocol) for precise time synchronization of networks
- DHCP Option 82 for IP address assignment with different policies
- Support EtherNet/IP and Modbus/TCP protocols for device management and monitoring
Compatible with PROFINET protocol for transparent data transmission
Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
IGMP snooping and GMRP for filtering multicast traffic
IEEE 802.1Q VLAN and GVRP protocol to ease network planning
QoS (IEEE 802.1p/1Q and TOS/DiffServ) to increase determinism
Port Trunking for optimum bandwidth utilization
Access Control Lists (ACL) increase the flexibility and security of network management
TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
SNMPv1/v2c/v3 for different levels of network management
RMON for efficient network monitoring and proactive capability
Bandwidth management prevents unpredictable network status
Lock port function for blocking unauthorized access based on MAC address
Port mirroring for online debugging
Automatic warning by exception through e-mail, relay output
Digital inputs for integrating sensors and alarms with IP networks
Redundant, dual DC power inputs
Configurable by Web browser, Telnet/serial console, CLI, Windows utility, and ABC-01 automatic backup configurator
|
|
|
The EDS-828 is a high-performance Layer 3 Ethernet switch designed for network routing. The improved hardware technology built into the EDS-828 replaces the software logic used by traditional routers,offering better performance, and making the switch ideal for largescale local area networks (LANs). In addition to Layer 3 features, the EDS-828 also supports advanced management and security features. In order to meet the demands of any industrial application, the EDS-828 uses a modular design that allows users to install up to 4 Gigabit Ethernet ports and 24 fast Ethernet ports, providing a high degree of flexibility for network expansion.
| • Technology |
| Standards |
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP |
| Protocols |
IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, Syslog, DHCP Option 66/67/82, SSH, LLDP, IEEE 1588 PTPv2, EtherNet/IP, Modbus/TCP, SNMP Inform, NTP Server/Client |
| Layer 3 Switching |
Static routing, RIP V1/V2, OSPF, DVMRP, PIM-DM |
| Layer 3 Switching Redundancy |
VRRP |
| MIB |
MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Groups 1, 2, 3, 9 |
| Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| • Switch Properties |
| Priority Queues |
4 |
| Max. Number of Available VLANs |
64 |
| VLAN ID Range |
VID 1 to 4094 |
| IGMP Groups |
256 |
| MAC Table Size |
16 K |
| Packet Buffer Size |
32 MB |
| • Interface |
| Fast Ethernet |
6 slots for any combination of 4-port interface modules, 10/100BaseT(X) or 100BaseFX |
| Gigabit Ethernet |
2 slots for any combination of 2-port interface modules, 10/100/1000BaseT(X) or 1000BaseSFP slot |
| Console Port |
RS-232 (RJ45 connector) |
| System LED Indicators |
STAT, PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL, T.RING |
| Mode LED Indicators |
LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEED |
| Alarm Contact |
2 relay outputs with current carrying capacity of 1 A @ 24 VDC |
| Digital Inputs |
2 inputs with the same ground, but electrically isolated from the electronics.
• +13 to +30V for state “1”
• -30 to +3V for state “0”
• Max. input current: 8 mA |
| • Power Requirements |
| Input Voltage |
24 VDC (12 to 45 VDC), redundant dual inputs |
| Input Current |
0.96 A @ 24 V |
| Overload Current Protection |
Present |
| Connection |
2 removable 6-contact terminal blocks |
| Reverse Polarity Protection |
Present |
| • Physical Characteristics |
| Housing |
IP30 protection |
| Dimensions |
362.4 x 142.5 x 128 mm (14.27 x 5.61 x 5.04 in) |
| Weight |
1950 g |
| Installation |
DIN-rail mounting, wall mounting (with optional kit) |
| • Environmental Limits |
| Operating Temperature |
0 to 60°C (32 to 140°F) |
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity |
5 to 95% (non-condensing) |
| • Standards and Certifications |
| Safety |
UL 508, UL 60950-1, CSA C22.2 No. 60950-1, EN 60950-1 |
| EMI |
FCC Part 15 Subpart B Class A, EN 55022 Class A |
| EMS |
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4, EN 61000-4-5 (Surge) Level 4,
EN 61000-4-6 (CS) Level 3, EN 61000-4-8, EN 61000-4-12 |
| Marine |
DNV, GL, LR, ABS, NK |
| Shock |
IEC 60068-2-27 |
| Freefall |
IEC 60068-2-32 |
| Vibration |
IEC 60068-2-6 |
| Note |
Please check Moxa’s website for the most up-to-date certification status. |
| • MTBF (mean time between failures) |
| Time |
191,203 hrs |
| Database |
Telcordia (Bellcore), GB |
|
|
|
|
