Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
EKI-5524MMI-ST-AE - ProView,4+2MMF 10/100Mbps Switch w/ST,-40~75 degree C by Advantech/ B+B Smartworx

EKI-5524MMI-ST-AE - ProView,4+2MMF 10/100Mbps Switch w/ST,-40~75 degree C
by Advantech/ B+B Smartworx

Write a review Write a review
  • Communicates with SCADA software via Modbus/TCP
  • Communicates with NMS (Networking management system) via SNMP
  • Port-based QoS for deterministic data transmission
  • -40~75°C operating temperature range (EKI-5524SSI/SSI-ST,EKI-5524MMI/ MMI-ST only)
  • 12 ~48 VDC (8.4 ~52.8 VDC) wide-range power input
  • EMS level 3 protection for extreme outdoor environments
  • IEEE 802.3az Energy Efficient Ethernet (EEE)
  • Jumbo Frame Support (Up to 9,216 Bytes)
  • Supports redundant 12~48VDC power input and P-Fail relay
  • Loop detection

 

Mfg SKU # : EKI-5524MMI-ST-AE
Our Price : $302.82
Stock : Call for Availability
Quantity :
EKI-5524MMI-ST-AE is one of The EKI-5524SS/SSI/SS-ST/SSI-ST and EKI-5524MM/MMI/MM-ST/MMI-ST are the world’s first convergence switches for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software and SNMP to communicate with NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT. The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately necessary data over the remaining ports. EKI-5524SS/SSI/SS-ST/SSI-ST and EKI-5524MM/MMI/MM-ST/MMIST switches use the highest quality components, to enable the range to operate in temperatures of between -40 and 75’C along with EMS Level 3 protection to repel electromagnetic interface for industrial resistance.

Communications

Standard

IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab

LAN

10/100Base-T(X), 100Base-FX

Transmission Distance

Ethernet: Up to 100 m

Multi-mode Fiber: Up to 2 km (EKI-5524MM Series)

Single-mode Fiber: Up to 30 km (EKI-5524SS Series)

Transmission Speed

Up to 1000 Mbps

Optical Fiber

Multi-mode

(EKI-5524MM/MMI/MM-ST/MMI-ST)

Wavelength: 1310 nm

Tx Power: -14/-20 dBm

Rx Sensitivity: -32 dBm

Parameters: 50/125 um, 62.5/125 um

Single-mode

(EKI-5524SS/SSI/SS-ST/SSI-ST)

Wavelength: 1310 nm

Tx Power: -8/-15 dBm

Rx Sensitivity: -34 dBm

Parameters: 9/125 um

Transmission Speed

Up to 100 Mbps

Interface

Connectors

4 x RJ45 ports

2 x SC/ST type fiber optic connectors

6-pin screw Terminal Block (including relay)

LED Indicators

P1, P2, P-Fail, Loop detection

10/100T(X): Link/Activity, Speed

Switch Properties

MAC Table Size

2K

Packet Buffer Size

1M bit

Switching Capacity

1.2 Gbps

Jumbo Frame

9216 bytes

Power

Power Consumption

Max. 4 W

Power Input

12~48 VDC (8.4~52.8 VDC), redundant dual inputs

Fault Output

1 Relay Output

Mechanism

Enclosure

IP30, metal shell with solid mounting kits

Dimensions (WxHxD)

43 x 120 x 84 mm

Mounting

DIN-rail, wall

Protection

Power Reverse

Present

Overload current

Present

Environment

Operating Temperature

EKI-5524SS/SS-ST/MM/MM-ST: -10~60°C (14~140°F)

EKI-5524SSI/SSI-ST/MMI/MMI-ST: -40~75°C (-40~167°F

Storage Temperature

-40 ~ 75°C (-40 ~ 167°F)

Operating Humidity

10 ~ 95% (non-condensing)

Storage Humidity

10 ~ 95% (non-condensing)

MTBF

144,890 hours

Certification

Safety

IEC/EN60950, UL60950, UL508, Class 1 Division 2, ATEX

EMI

FCC Part 15 Subpart B Class A, EN 55011/55022 Class A

EMC

EN61000-4-2 (ESD) Level 3

EN61000-4-3 (RS) Level 3

EN61000-4-4 (EFT) Level 3

EN61000-4-5 (Surge) Level 3

EN61000-4-6 (CS) Level 3

EN61000-4-8 (Magnetic Field) Level 3

Shock

IEC 60068-2-27

Freefall

IEC 60068-2-32

Vibration

IEC 60068-2-6


Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.