|
|
|
ICP DAS NS-205AFC-T - Multi Mode, SC Connector, 4 port 10/100 Mbps Ethernet with 1 Fiber port
by ICP DAS
|
|
|
|
Multi-mode, SC Connector, 4-port 10/100 Mbps Ethernet with 1 Fiber port Switch, supports operating temperatures from -30 °C ~ +75 °C
|
|
|
 The NS-205AF/NSM-205AF is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 60 km) transmissions.
The NS-205AF/NSM-205AF provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
- Provides 1 x 100-FX fiber port plus 4 x Ethernet ports
- Each port supports both 10/100 Mbps speed auto negotiation
- Full duplex IEEE 802.3x
- Automatic MDI/MDI-X crossover for plug-and-play
- Store-and-forward architecture
- Redundant dual +12 ~ 48 VDC power inputs
- Supports operating temperatures from -30 ~ +75°C
- DIN-Rail Mounting
| Models |
NS-205AF |
| PoE |
– |
| Input Voltage Rangeg |
+12 ~ 48 VDC |
| Operating Temperature |
-30 °C ~ +75 °C |
| Casing |
Plastic |
| Installation |
DIN-Rail |
Dimensions (W x L x H)
(Unit: mm) |
31 x 127 x 157 |
| Models |
NS-205AF Series |
| Technology |
| Standards |
IEEE 802.3, 802.3u, 802.3x |
| Processing Type |
Store & forward; wire speed switching |
| MAC Addresses |
1024 |
| Memory Bandwidth |
2.0 Gbps |
| Frame Buffer Memory |
512 Kbit |
| Flow Control |
IEEE 802.3x flow control |
| Ethernet Interface |
| RJ-45 Ports |
10/100 Base-T(X) auto negotiation speed, Full duplex mode, and auto MDI/MDI-X connection |
| LED Indicators |
Power, Link/Act, 10/100M |
| Ethernet Isolation |
1500 Vrms 1 minute |
| +/-4 kV ESD Protection |
Yes |
| Fiber Interface (100 Base-FX; SC/ST type) |
| Multi-Mode |
NS-205AFT-T/FC-T
NSM-205AFT-T/FC-T |
Multi mode fiber cables: 50/125, 62.5/125 or 100/140 μm
Distance: 2 km, (62.5/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -20 dBm
Max. TX Output: -14 dBm
Max. RX Sensitivity: -32 dBm
Min. RX Overload: -8 dBm
Budget: 12 dBm |
| Single-Mode |
NS-205AFCS-T
NSM-205AFCS-T |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 30 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -15 dBm
Max. TX Output: -8 dBm
Max. RX Sensitivity: -34 dBm
Min. RX Overload: -5 dBm
Budget: 19 dBm |
| Single-Mode |
NS-205AFCS-60T
NSM-205AFCS-60T |
Single-mode fiber cables: 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance: 60 km, (9/125 μm recommended) for full duplex
Wavelength: 1300 or 1310nm
Min. TX Output: -5 dBm
Max. TX Output: 0 dBm
Max. RX Sensitivity: -35 dBm
Min. RX Overload: -5 dBm
Budget: 30 dBm |
| Power Input |
| Input Voltage Range |
+12 ~ +48 VDC (Redundant input) |
| Power Consumption |
0.2 A @ 24 VDC |
| Protection |
Power reverse polarity protection |
| +/-4 kV ESD Protection |
Yes |
| Connector |
6-Pin Removable Terminal Block |
| Mechanical |
| Casing |
Plastic (Flammability UL 94V-0) |
| Dimensions (W x L x H) |
31 mm x 127 mm x 157 mm |
| Installation |
DIN-Rail |
| Environment |
| Operating Temperature |
-30 °C ~ +75 °C |
| Storage Temperature |
-40 °C ~ +85 °C |
| Ambient Relative Humidity |
10% ~ 90% RH, non-condensing |
|
|
|
|
