NS-205FC - 1 Port Fiber Optic, 4 Port 10/100M RJ 45 Connector, Multi Mode, SC connector, Plastic Case
by ICP DAS

Ethernet is used for transmitting a signal up to 2 Km(6,600 ft), and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion.

The NS-205FC operates at either half or full duplex mode. In full duplex mode, range is 2km with 62.5/ 125μm fiber cables; in half duplex mode, range is 412m with 62.5/ 125μm fiber cables.

The Ethernet supports 10/ 100M auto-negotiation feature and auto MDI /MDIX function

• Automatic MDI / MDI-X crossover for plug-and-play
• Each port supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 3.2Gbps high performance memory bandwidth
• Frame buffer memory:512 Kbit
• Integrated look-up engine with dedicated 1 K unicast MAC addresses.
• Supports +10 ~ +30Vdc voltage
• Supports operating temperatures from 0° ~ +70°C
• DIN rail mount for industrial usage

• Compatibility:
  • IEEE 802.3
  • IEEE802.3u
  • IEEE802.3x
• Interface:
  • 10/100 Base-T(X)
  • 100 Base-FX(SC Connector; Multi-mode)
• Ethernet Port: 10/100 Mbps x 4
• Fiber Optics Port: 100 Mbps x 1
• Provides LEDs for network and power monitoring
• ESD Protection:
  • 8 KV Contact Discharge
  • 15KV Air-Gap Discharge
• Fiber Optic Transmission distance:
  • Multi mode fiber:50/125, 62.5/125 or 100/140 μm
  • Multi mode fiber, 412 m for half duplex, 2 km for full duplex
• Ethernet Cables:
  • 10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.)
  • 100 Base-TX (Cat.5 UTP cable; 100m Max.)
• Environment:
  • Operating temperature: 0°C ~ +70°C
  • Storage Temperature: -20 ~ +85°C
  • Relative Humidity: 10% to 90% non-condensing
• Dimensions: 64mm x 110mm x 98mm (W x H x D)
• Power requirements:
  • +10 to +30Vdc (Removable Terminal Block)
• Power consumption:
  • 0.14A@24Vdc (± 5%, arrowed)