NSM-206FC - 4 Port 10/100 Base RJ 45 with 2 Port Fiber Optic, SC Connector, Multi-Mode, Metal Case
by ICP DAS

The NSM-206FC (SC Connector; Multi-mode) is an unmanaged, 4-Port Industrial 10/100 Base-T(X) with Dual 100 Base-FX Switch that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It uses Ethernet for transmitting a signal up to 2Km(6,600 ft), and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion. The NSM-206FC operates at either half or full duplex mode. In full duplex mode, range is 2Km with 62.5/ 125μm fiber cables; in half duplex mode it's range is 412m with 62.5/ 125μm fiber cables. The NSM-206FC can extend your LAN in a daisy chain configuration. Please refer to User's Manual" target="_blank">User's Manual. NSM-206FC provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the NSM-206FC's power needs.

• Automatic MDI / MDI-X crossover for plug-and-play
• Each port supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 1.6 Gbps high performance memory bandwidth
• Redundant Power Inputs +10 ~ +30V DC
  • Power failure alarm by relay output
• Supports operating temperatures from 0°C ~ +70°C
• IP20, rugged high-strength metal case
• DIN-Rail; Wall Mounting

• Compatibility : IEEE 802.3, IEEE802.3u, IEEE802.3x
• Frame buffer memory : 256 Kbit
• Address Table Size : 1K uni-cast addresses
• Interface : 10/100 Base-T(X) and 100 Base-FX(SC Connector; Multi-mode)
• Ethernet Port : 10/100 Mbps x 4
• Fiber Optic Port : 100 Mbps x 2 (SC Connector)
• Provides LEDs for network and power monitoring
• ESD Protection :
  • 4 KV Contact Discharge
  • 8 KV Air-Gap Discharge
• Fiber Optic Transmission distance :
  • Multi mode fiber cables : 50/125, 62.5/125 or 100/140 μm
  • Distance : 2 km, 1300 ~ 1310 nm (62.5/125 μm)
  • Min. TX Output : -20 dBm
  • Max. TX Output : -14 dBm
  • Sensitivity : -34 to -31 dBm
• Ethernet Cables :
  • 10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.)
  • 100 Base-TX (Cat.5 UTP cable; 100m Max.)
• General Environment :
  • Operating temperatur : 0°C ~ +70°C
  • Storage Temperature: -20 ~ +85°C
  • Relative Humidity: 10% to 90% non-condensing
• Dimensions : 72.5mm x 110mm x 104mm (W x H x D)
• Power requirements : +10 to 30Vdc (Removable Terminal Block)
• Alarm Contact: One relay output with current carrying capacity of 2A @ 30 VDC
• Power consumption : 0.24A@24Vdc (± 5%, arrowed)