Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
07017370 IDS-106GE-2SFP - Industrial Gigabit Switch with 8-ports: 6 x 10/100/1000Mbps RJ45 Ethernet ports and 2 x 100/1000Mbps S by PERLE

07017370 IDS-106GE-2SFP - Industrial Gigabit Switch with 8-ports: 6 x 10/100/1000Mbps RJ45 Ethernet ports and 2 x 100/1000Mbps S

Write a review Write a review
  • 6 x RJ45 ports with 10/100/1000 Mbps on all ports
  • 2 x SFP slots for 100/1000Base-X SFP modules supplied by Perle, Cisco, or other MSA compliant manufacturers
  • Redundant dual power input 12/24/48 VDC
  • Reverse polarity protection
  • Fan-less design with no moving parts
  • -40 to 75C industrial operating temperature support
  • QoS (Quality of Service) prioritized messages
Mfg SKU # : 07017370
List Price : $273.00
Our Price : $246.00
Stock : Call for Availability
Quantity :

With a combination of six Gigabit copper ports, and two SFP fiber ports for long distance connectivity, Perle IDS-106GE Industrial Gigabit Ethernet Switches are designed for easy deployment in industrial environments with harsh operating conditions and limited space. Designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, infrastructure, transportation, security, oil and gas, and mining the IDS-106GE Switches are economical easy-to-use devices, that provide essential industrial Ethernet networking functionality.

These unmanaged switches support 9 to 55VDC redundant power input and provide a relay alarm for power failure. The full/half-duplex auto-negotiation and auto MDI/MDIX operation simplifies installation and setup for convenient connection of a variety of network devices. And, QoS support allows for traffic prioritization and effective management of resources.

For automation and industrial control systems using EtherNet/IP or PROFINET, these rugged, DIN rail mountable switches with metal housing provides security and easy installation (mounting kit is included).


6 x RJ45 ports for 10/100/1000Base-TX up to 100 meters (328 ft)


Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types

Ethernet isolation 1500 V

Small Form Factor Pluggable (SFP) slot(s) 2 empty SFP slot models for 100/1000Base-X SFP modules supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs
Alarm Contact One relay output with current 0.5A@30V
Dual Power Input 12/24/48VDC (9-55VDC)
Power Consumption 5.55W max
Maximum Current Consumption @ 24VDC 0.20A @ 24VDC
Power Connector 7-Pin Removable Terminal Block
Overload Current Protection 2A fuse provides overload current protection
Reverse Polarity Protection The positive and negative inputs can be reversed providing safe and simple power connectivity.
Switch Properties

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX/FX

IEEE 802.3az Energy Efficient Ethernet

IEEE 802.1p Quality of Service (QoS)

Processing Type


Auto Negotiation

Half-duplex back-pressure and IEEE

802.3x full-duplex flow control


MAC Address Table Size 4K
Packet Buffer Memory 1.5 Mbit
Jumbo Frame Size 9216 bytes
Forward/Filtering Rate

14,880pps for 10Mbps

148,810pps for 100Mbps

1,488,100pps for 1000Mbps

Power LED 1 This LED is green when power is applied
Power LED 2 This LED is green when power is applied
Fault LED This LED is red when a fault is detected
RJ45 / SFP Ethernet LED These LED is solid green for established link and bllinks green when activity is detected (per port)
Environmental Specifications
Operating Temperature Ranges

IDS-106GE-2SFP: -10 to 60C (14 to 140F)

IDS-106GE-2SFP-XT: -40 to 75C (-40 to 167F)

Storage Temperature Range -40 to 85C (-40 to 185F)
Operating Humidity Range 5% to 90% non-condensing
Storage Humidity Range 5% to 95% non-condensing
Operating Altitude Up to 3,048 meters (10,000 feet)
Chassis Metal with an IP40 ingress protection rating
Din Rail Mountable DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.
Maximum Heat Output 18.926 BTU/Hr

2160910 hours

MTBF Calculation model based on MIL-HDBK-217-FN2 @ 25C

Product Weight and Dimensions
Weight 0.336 Kg, 0.74 lbs

45x75x100mm (W x D x H)


Shipping Weight 336g (0.74lbs)
Shipping Dimensions 45x75x100mm, 1.77"x2.95"x3.94" (W x D x H)
Contents Shipped

Industrial Ethernet Switch with DIN Rail attachment

Terminal block

Installation guide

Standards and Certifications
Safety UL 61010
EMC Emissions

FCC Part 15 Class A

VCCI Class A

EN 61000-6-4


EN 55032

EMC Immunity

EN 61000-6-2

EN 61000-4-2 (ESD)

EEN 61000-4-3 (Radiated RFI)

EN 61000-4-4 (Burst)

EN 61000-4-5 (Surge)

EN 61000-4-6 (Induced RFI)

EN 61000-4-8 (Magnetic field)

Industrial EN 50121-4
Environmental Test Compliance

IEC 60068-2-6 Fc (Vibration)

IEC 60068-2-27 Ea (Shock)

Environmental Reach, RoHS and WEEE Compliant

ECCN: 5A991

HTSUS Number: 8517.62.0020

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.