Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
07017430 IDS-104FE-S2SC20 - Industrial Switch with 5-ports: 4 x 10/100Mbps RJ45 ports and 1 x 100Base-FX by PERLE

07017430 IDS-104FE-S2SC20 - Industrial Switch with 5-ports: 4 x 10/100Mbps RJ45 ports and 1 x 100Base-FX
by PERLE

Write a review Write a review
07017430_SUMMARY.html
  • 4 x RJ45 ports with 10/100 Mbps on all ports
  • 1 x SC or ST port for 100Base-FX
  • Redundant dual power input 12/24/48 VDC
  • Reverse polarity protection
  • Fan-less design with no moving parts
  • -10 to 60C industrial operating temperature support
  • QoS (Quality of Service) prioritized messages
Mfg SKU # : 07017430
List Price : $174.00
Our Price : $157.00
Stock : 2
Quantity :
07017430_DESCRIPTION.html

With a combination of four Fast Ethernet copper ports, and one Fast Ethernet fiber port for long distance connectivity, Perle IDS-104FE Industrial Ethernet Switches are designed for easy deployment in industrial environments with harsh operating conditions and limited space. Designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, infrastructure, transportation, security, oil and gas, and mining the IDS-104FE Switches are economical easy-to-use devices, that provide essential industrial Ethernet networking functionality.

These unmanaged switches support 9 to 55VDC redundant power input and provide a relay alarm for power failure. The full/half-duplex auto-negotiation and auto MDI/MDIX operation simplifies installation and setup for convenient connection of a variety of network devices. And, QoS support allows for traffic prioritization and effective management of resources.

For automation and industrial control systems using EtherNet/IP, these rugged, DIN rail mountable switches with metal housing provides security and easy installation (mounting kit is included).

07017430.html
Interfaces
RJ45

4 x RJ45 ports for 10/100Base-TX up to 100 meters (328 ft)

Auto-negotiation

Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types

Ethernet isolation 1500 V

100FX Fiber

IDS-104FE-M2SC2: 1 x Multi Mode (SC) - 2Km

IDS-104FE-M2ST2: 1 x Multi Mode (ST) - 2Km

IDS-104FE-S2SC20: 1 x Single Mode (SC) - 20Km

IDS-104FE-S2ST20: 1 x Single Mode (ST) - 20Km

Power
Power Input 12/24/48VDC (9-55VDC)
Power Consumption 1.82W Max. 0.14A@12VDC / 0.07A@24VDC, 0.038A@48VDC
Maximum Current Consumption @ 24VDC 0.14A@12VDC / 0.07A@24VDC, 0.038A@48VDC
Power Connector 3-Pin Removable Terminal Block
Overload Current Protection Reset-able fuse provides overload current protection
Reverse Polarity Protection The positive and negative inputs can be reversed providing safe and simple power connectivity.
Switch Properties
Standards

IEEE 802.3u 100BASE-TX/FX

IEEE802.3x full-duplex flow control

IEEE 802.3az Energy Efficient Ethernet

IEEE 802.1p Quality of Service (QoS)

Processing Type

Store-and-Forward

Auto Negotiation

Half-duplex back-pressure

802.3x full-duplex flow control

Auto MDI/MDIX

MAC Address Table Size 1K
Packet Buffer Memory 448 Kbps
Jumbo Frame Size No
Forward/Filtering Rate

14,880pps for 10Mbps

148,810pps for 100Mbps

Indicators
Power LED This LED is green when power is applied
RJ45 / SFP Ethernet LED Link/Activity (Green), Speed (Yellow)
Environmental Specifications
Operating Temperature Ranges -10 to 60C (14 to 140F)
Storage Temperature Range -40 to 85C (-40 to 185F)
Operating Humidity Range 5% to 90% non-condensing
Storage Humidity Range 5% to 95% non-condensing
Operating Altitude Up to 3,048 meters (10,000 feet)
Chassis Plastic with an IP30 ingress protection rating
Din Rail Mountable DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.
Maximum Heat Output 6.22 BTU/Hr (max.)
MTBF

710611 hours

MTBF Calculation model based on MIL-HDBK-217-FN2 @ 25C

Product Weight and Dimensions
Weight 0.2Kg / 0.44lbs
Dimensions 26 x 70 x 110mm / 1.02" x 2.76" x 4.33" (W x D x H)
Packaging
Shipping Weight 0.34Kg (0.75lb.)
Shipping Dimensions 30 x 76.3 x 110mm, 1.18" x 3.05" x 4.4" (W x D x H)
Contents Shipped

Industrial Ethernet Switch with DIN Rail attachment

Terminal block

Installation guide

Standards and Certifications
Safety UL 62368
EMC Emissions

FCC Part 15 Class A

VCCI Class A

EN 61000-3-2

EN 61000-3-3

EN 61000-6-4

EMC Immunity

EN 61000-6-2

EN 61000-4-2 (ESD)

EEN 61000-4-3 (Radiated RFI)

EN 61000-4-4 (Burst)

EN 61000-4-5 (Surge: �4kV line-to-ground)

EN 61000-4-6 (Induced RFI)

EN 61000-4-8 (Magnetic field)

Industrial

IEC 60068-2-6 Fc (Vibration)

IEC 60068-2-27 Ea (Shock)

Laser Safety

EN 60825-1

Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11.

Environmental Reach, RoHS and WEEE Compliant
Other

ECCN: 5A991

HTSUS Number: 8517.62.0020


Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.