| Interfaces |
| RJ45 |
4 x RJ45 ports for 10/100Base-TX up to 100 meters (328 ft)
Auto-negotiation
Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
Ethernet isolation 1500 V
|
| 100FX Fiber |
IDS-104FE-M2SC2: 1 x Multi Mode (SC) - 2Km
IDS-104FE-M2ST2: 1 x Multi Mode (ST) - 2Km
IDS-104FE-S2SC20: 1 x Single Mode (SC) - 20Km
IDS-104FE-S2ST20: 1 x Single Mode (ST) - 20Km
|
| Power |
| Power Input |
12/24/48VDC (9-55VDC) |
| Power Consumption |
1.82W Max. 0.14A@12VDC / 0.07A@24VDC, 0.038A@48VDC |
| Maximum Current Consumption @ 24VDC |
0.14A@12VDC / 0.07A@24VDC, 0.038A@48VDC |
| Power Connector |
3-Pin Removable Terminal Block |
| Overload Current Protection |
Reset-able fuse provides overload current protection |
| Reverse Polarity Protection |
The positive and negative inputs can be reversed providing safe and simple power connectivity. |
| Switch Properties |
| Standards |
IEEE 802.3u 100BASE-TX/FX
IEEE802.3x full-duplex flow control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Quality of Service (QoS)
|
| Processing Type |
Store-and-Forward
Auto Negotiation
Half-duplex back-pressure
802.3x full-duplex flow control
Auto MDI/MDIX
|
| MAC Address Table Size |
1K |
| Packet Buffer Memory |
448 Kbps |
| Jumbo Frame Size |
No |
| Forward/Filtering Rate |
14,880pps for 10Mbps
148,810pps for 100Mbps
|
| Indicators |
| Power LED |
This LED is green when power is applied |
| RJ45 / SFP Ethernet LED |
Link/Activity (Green), Speed (Yellow) |
| Environmental Specifications |
| Operating Temperature Ranges |
-10 to 60C (14 to 140F) |
| Storage Temperature Range |
-40 to 85C (-40 to 185F) |
| Operating Humidity Range |
5% to 90% non-condensing |
| Storage Humidity Range |
5% to 95% non-condensing |
| Operating Altitude |
Up to 3,048 meters (10,000 feet) |
| Chassis |
Plastic with an IP30 ingress protection rating |
| Din Rail Mountable |
DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. |
| Maximum Heat Output |
6.22 BTU/Hr (max.) |
| MTBF |
710611 hours
MTBF Calculation model based on MIL-HDBK-217-FN2 @ 25C
|
| Product Weight and Dimensions |
| Weight |
0.2Kg / 0.44lbs |
| Dimensions |
26 x 70 x 110mm / 1.02" x 2.76" x 4.33" (W x D x H) |
| Packaging |
| Shipping Weight |
0.34Kg (0.75lb.) |
| Shipping Dimensions |
30 x 76.3 x 110mm, 1.18" x 3.05" x 4.4" (W x D x H) |
| Contents Shipped |
Industrial Ethernet Switch with DIN Rail attachment
Terminal block
Installation guide
|
| Standards and Certifications |
| Safety |
UL 62368 |
| EMC Emissions |
FCC Part 15 Class A
VCCI Class A
EN 61000-3-2
EN 61000-3-3
EN 61000-6-4
|
| EMC Immunity |
EN 61000-6-2
EN 61000-4-2 (ESD)
EEN 61000-4-3 (Radiated RFI)
EN 61000-4-4 (Burst)
EN 61000-4-5 (Surge: �4kV line-to-ground)
EN 61000-4-6 (Induced RFI)
EN 61000-4-8 (Magnetic field)
|
| Industrial |
IEC 60068-2-6 Fc (Vibration)
IEC 60068-2-27 Ea (Shock)
|
| Laser Safety |
EN 60825-1
Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825
FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11.
|
| Environmental |
Reach, RoHS and WEEE Compliant |
| Other |
ECCN: 5A991
HTSUS Number: 8517.62.0020
|
