|
|
EDS-G205A-4PoE-1GSFP-T - Unmanaged gigabit PoE switch with 4 PoE 10/100/1000BaseT(X) ports, 1 1000BaseX (SFP slot) port by MOXA
|
|
|
- Full Gigabit Ethernet ports
- IEEE 802.3af/at, PoE+ standards
- Up to 30 watts output per PoE port
- 24/48 VDC flexible redundant power inputs
- Supports 9.6 KB jumbo frames
- Intelligent power consumption detection and classification
- Smart PoE over current and short circuit protection
- -40 to 75°C operating temperature range (T models)
|
|
|
The EDS-G205A-4PoE-1GSFP-T switches are smart, 5-port, unmanaged full Gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.
• Technology |
Standards |
IEEE 802.3af/at for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control |
Processing Type |
Store and Forward |
• Switch Properties |
MAC Table Size |
8 K |
Packet Buffer Size |
136 KB |
Jumbo Frame Size |
9.6 KB |
• Interface |
Fiber Port |
1000BaseSFP slot |
RJ45 Ports |
10/100/1000BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
PoE Pinout |
V+, V+, V-, V- for Pin 1,2,3,6 (Endspan, MDI Alternative A) |
LED Indicators |
P1, P2, 10/100/1000M, PoE |
• Power Requirements |
Input Voltage |
24/48 VDC, redundant dual inputs |
Input Current |
Max 7.5 A @ 24 VDC (supports up to 4 ports at 30 watts per PoE port) |
Overload Current Protection |
Present |
Connection |
2 removable 2-contact terminal blocks |
Reverse Polarity Protection |
Present |
• Physical Characteristics |
Housing |
Metal, IP30 protection |
Dimensions |
29 x 135 x 105 mm (1.14 x 5.31 x 4.13 in) |
Weight |
300 g |
Installation |
DIN-rail mounting, wall mounting (with optional kit) |
• Environmental Limits |
Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity |
5 to 95% (non-condensing) |
• Standards and Certifications |
Safety |
UL 508 |
EMI |
FCC Part 15 Subpart B Class A, EN 55022 Class A |
EMS |
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4, EN 61000-4-5 (Surge) Level 4,
EN 61000-4-6 (CS) Level 3, EN 61000-4-8 |
Rail Traffic |
EN 50121-4 |
Shock |
IEC 60068-2-27 |
Freefall |
IEC 60068-2-32 |
Vibration |
IEC 60068-2-6 |
Note |
Please check Moxa’s website for the most up-to-date certification status. |
|
|