Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
IBS-102FX-MM-LC - Industrial 2-port optical bypass switch for fiber optical network with 4xLC duplex Connector - Multi mode by ORing Industrial Networking

IBS-102FX-MM-LC - Industrial 2-port optical bypass switch for fiber optical network with 4xLC duplex Connector - Multi mode
by ORing Industrial Networking

Write a review Write a review
IBS-102FX-MM-LC
  • Support 100M/1G/10G optical bypass function of 2 port duplex or 4 port simplex fiber connection
  • Multi-mode optical fiber
  • Low insertions loss
  • Throughput not affected and no extra delay
  • Bypass switching time < 10ms
  • Dual wide-range power inputs: 12~48VD
  • Relay output for power failure warning
  • Rigid IP-30 housing design
  • DIN-Rail/Wall-mount installation
Mfg SKU # : IBS-102FX-MM-LC
Our Price : $915.00
Stock : Call for Availability
Quantity :

IBS-102FX series are the external Bypass switches for 100M/1G/10G fiber optical networks. These fiber optical bypass switches protect the network from failures and subsequent maintenance by ensuring network integrity during power loss. Each of these fiber optical bypass switches includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operation mode of the Bypass switch is set to Normal, and the local networking device is connected with main-network. When power failure occurs, the Bypass switch is swiftly set to bypass mode to isolate the main-network from the local networking device.

Physical Ports    
LC connector 4 Duplex Multi-mode LC connector  
Fiber Ethernet    
Optical Fiber Multi-mode: 50/125μm or 62.5/125μm  
Operating Wavelength 780 ~ 1350 nm  
Insert loss < 1.0 dB  
Switch time < 10ms  
DIP Switch Settings    
DIP Swicth No.1 Power-1 failed warning detection – (On) relay enable (Off) relay disable
DIP Swicth No.2 Power-2 failed warning detection – (On) relay enable (Off) relay disable
LED Indicators    
Power Indicator Green : Power LED x 2
Normal indicator Green On : Operated in normal mode
Fault indicator Amber : Indicates power failure occurred
Fault contact    
Relay Relay output for power failure warning
Power    
Redundant Input Power Dual 12~48 VDC power inputs at DC-Jack and 4-pin terminal block
Power Consumption (Typ.) 2.7 watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Physical Characteristics    
Enclosure IP-30
Dimensions (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inch.)
Weight (g) 405 g
Environmental    
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing  
Regulatory Approvals    
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.