Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
NSM-205GP - Unmanaged Ethernet Switch with 4 Ethernet Port 10/100/1000 Mb with POE, 1 Ethernet/Fiber Port by ICP DAS

NSM-205GP - Unmanaged Ethernet Switch with 4 Ethernet Port 10/100/1000 Mb with POE, 1 Ethernet/Fiber Port

Write a review Write a review

Industrial Unmanaged Ethernet Switch. Has 4 Ethernet ports (10/100/1000 Mb) with POE + 1 additional Ethernet/Fiber port. Has operating temperature range of -40°C ~ +75°C (-40°F ~ +167°F)


Mfg SKU # : NSM-205GP
List Price : $689.00
Our Price : $676.00
Stock : 2
Quantity :

The NSM-205GP is 5-port unmanaged full Gigabit Ethernet switch supporting Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment (PSE), and when used in this way, the NSM-205GP switch enable centralization of the power supply, providing up to 30 watts. The NSM-205GP can be used to power IEEE 802.3af/at standard devices (PD).

Voltage boost technology supports 24V industrial power sources ensuring that a full and proper PSE voltage is available across all PoE ports.

  • Full Gigabit Ethernet ports
  • 4 PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
  • 24/48 VDC flexible redundant power inputs
  • Supports 10 KB jumbo frames
  • Pluggable SFP transceiver port
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Supports Dual +18 ~ 55 VDC power input and 1 relay output
  • Supports operating temperatures from –40°C ~ +75°C (-40°F ~ +167°F)
  • DIN-Rail Mounting, Wall Mounting (optional)
Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow Control
IEEE 802.3af Power Over Ethernet
IEEE 802.3at Power Over Ethernet
Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity
Processing Type Store & forward, wire speed switching
MAC Address 8K
Memory Bandwidth 10 Gbps
Frame Buffer Memory 1 Mbit
Jumbo Frame 10K for Speed 1000M
Flow Control IEEE802.3x flow control, back pressure flow control
RJ-45 Port 10/100/1000 BaseT(X), 10/100BaseT(X) auto negotiation speed, full/half duplex mode, and auto MDI/MDI-X connection
Fiber Port 1000BaseSFP slot/100BaseSFP slot
LED Indicators PWR1, PWR2, Power fail, 10/100M, 1000M, Link/Act, Power Device is detected
Ethernet Isolation 1500 Vrms 1 minute
DIP Switch 100BaseSFP/1000BaseSFP and PoE/PoE+ setting
Power Input
Redundant Input Range Flexible input +24/+48 VDC Nominal. ( +18 ~ +55 VDC)
Power Consumption 0.13@ 48 VDC without PD loading; 3.1 A @ 48 VDC with PD full loading (30 W per ports)
0.25@ 24 VDC without PD loading; 6.2 A @ 24 VDC with PD full loading (30 W per ports)
Alarm Contact One relay output with current carrying capacity of 1A @ 30 VDC
Protection Power reverse polarity protection
Connector 6-Pin Removable Terminal Block (Power & Relay)
Chassis Metal with an IP30 ingress protection rating
Dimensions (W x L x H) 28 mm x 160 mm x 122 mm
Installation DIN-Rail or Wall Mounting (with optional kit)
Operating Temperature -40°C ~ +75°C (-40°F ~ +167°F )
Storage Temperature -40°C ~ +85°C (-40°F ~ +185°F)
Ambient Relative Humidity 10 ~ 90% RH, non-condensing

l'); ?>
Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.