|
|
TP-POE-HP-24G - 24V 36W High power Gigabit POE Power injector, Surge Protected, US Power Cord by Tycon Systems
|
|
|
- Built-in Surge Protection
- Remotely Power Equipment thru CAT5 Cable up to 100m
- Autoranging Switching Power Supply
- Short Circuit, Over Current and Over Voltage Protection
- High Temperature Operation to 60°C
- Compact size
- Floor / Desktop / Wall Mount
- CE/FCC/UL/CB Approved
|
|
|
The TP-POE-HP-24G High PoE Power Source offered by Tycon Power Systems is a
quality power injector providing years of reliable operation even in the
toughest conditions.
It accepts Gigabit data-in on a shielded RJ45 Jack and provides Gigabit
data-out and power on a shielded RJ45 output jack. They work by supplying power
to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The
Ethernet spec supports distances up to 100m (328 feet).
The TP-POE-HP are autoranging so that they accept AC inputs from 90VAC to
264VAC (50/60 Hz) and they supply 5% regulated 24V DC voltage at 48W on the
output. They have various protections for surge, short circuit and overload.
AC Input |
90-264VAC 47-63Hz |
Max Inrush Current (120VAC) |
30A |
Efficiency |
85% |
Line / Load Regulation |
1% / 5% |
Ripple / Noise |
1% / 2% |
Protections – Auto Recover |
Over-Voltage, Short Circuit, Over-Current |
Surge Protection (+/- 4KV)
( IEC 61000-4-2 ) |
Ethernet: 4 Pin (1/2,3/6) Common Mode Protection, 7.5V Clamping
Voltage 5.4A (8/20µs) Peak Pulse Current, <2pF Shunt Capacitance
AC Input: Operating voltage = 385VDC, Clamping voltage = 775VDC, Maximum
discharge current is 1200A(8/20us) |
EMC Standards |
FCC Class B EN55022 Class B |
Safety Standards |
UL1950, CSA 22.2 & TUV EN60950 |
Environmental Standards |
RoHs |
Operating Temperature |
-30 to +60°C (-22 to +140°F) |
Operating Humidity (RH) |
5% - 90% |
Storage Temperature |
-40 to +80°C (-40 to +176°F) |
Case Dimensions |
125 x 75 x 38mm (4.9 x 3 x 1.5”) |
Weight |
300g (10.6oz) |
POE Type |
Passive POE ( Pins 4,5 V+, Pins 7,8 V-) |
POE Output Voltage (+/- 2.5%) |
24V |
Output Current |
1.5A |
Output Power |
36W |
|
|