Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
EIRHP305-T - Discontinued - POE SWITCH (4) 10/100 POE (25W), (1) 10/100, WIDE TEMP by Advantech/ B+B Smartworx

EIRHP305-T - Discontinued - POE SWITCH (4) 10/100 POE (25W), (1) 10/100, WIDE TEMP
by Advantech/ B+B Smartworx

Write a review Write a review
  • Five 10/100 Base-T Ethernet ports
  • Class 1/Division 2
  • Four 25 W high powered 802.3af end-point PoE ports
  • Dual 48 VDC power inputs
  • Wide operating temperature (-40 to 75°C)
  • DIN Rail or Panel Mount


The EIRHP305-T is a five Port Unmanaged Industrial Ethernet Switch with four 802.3af (Alternative A) end-point Power-Over-Ethernet injector ports. As power sourcing equipment (PSE), these ports can be used to power 802.3af compliant powered devices (PD). This eliminates the need for a separate power line to each end device.

High-Speed Transmissions: The EIRHP305-T includes a switch controller that automatically senses transmission speed (10/100 Mbps). The RJ-45 interface also auto-detects MDI or MDI-X, eliminating the requirement for a crossover cable. Each port is buffered and supports store-and-forward protocol.

Dual Power Input: To reduce the risk of power failure, the EIRHP305-T provides two 48 VDC power inputs. If the power fails, the switch will automatically use the secondary power input. Also, if the power goes out the corresponding P1 or P2 LED will go out and the Fault LED will light. The contacts for the alarm output will also open.

Flexible Mounting: The switch features a space saving IP30 metal enclosure that can be DIN or Panel mounted.

Wide Operating Temperature: With an operating temperature of -40 to 75°C (-40 to 167°F), this switch is suitable for use in some of the harshest industrial environments that exist.

Easy Troubleshooting: There are two LED indicators for each port that display the link status and transmission speed. Three LED indicators for power (P1, P2 and Fault) show power status. FWD LED’s for each PoE port indicate if the switch is providing power to the end-point device. These indicators allow you to quickly diagnose and correct problems and ensure your network remains reliable.

Gigabit Speeds (SFP models) Higher throughput for high bandwidth networks
rugged IP30 DIN/Panel Mount Metal Case Built tough for harsh industrial environments
Dual Power INputs wth Alarm Output Redundancy ensures the network keeps running
Wide Temperature Rating on - T models Suited for extreme temperature environments
Class 1 Div 2 Deisgned for hazardous locations

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.