Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
IPS-1042-FA-SS-SC  - Slim Type 4x 10/100TX (RJ-45) PoE+ (30Watts) with 2-port 100FX Single mode fiber SC by ORing Industrial Networking

IPS-1042-FA-SS-SC - Slim Type 4x 10/100TX (RJ-45) PoE+ (30Watts) with 2-port 100FX Single mode fiber SC
by ORing Industrial Networking

Write a review Write a review
  • IPS-1042FA series provide 4x10/100Base-T(X) PoE(P.S.E.) and 2x100Base-FX single/multi-mode fiber ports
  • Supports IEEE 802.3at compliant 30Watts PoE per port
  • Support auto-negotiation and auto-MDI/MDI-X
  • Support store and forward transmission
  • Support flow control
  • Support surge protection technology
  • Warning system by relay output
  • Slim type rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled
Mfg SKU # : IPS-1042-FA-SS-SC
Our Price : $569.00
Stock : 2
Quantity :

IPS-1042FA series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FA series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FA series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FA series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment.

Physical Ports  
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E. - 4  
Fiber Ports Number - 2  
Fiber Ports Standard - 100Base-FX  
Fiber Mode - Single-mode  
Fiber Diameter (μm) - 9/125 μm  
Fiber Optical Connector - SC  
Fiber Ports Specifications Typical Distance (km) - 30 km  
Wavelength (nm) - 1310 nm  
Max. Output Optical Power (dBm) - -8 dBm  
Min. Output Optical Power (dBm) - -15 dBm  
Max. Input Optical Power(Saturation) - 0 dBm  
Min. Input Optical Power (Sensitivity) - -34 dBm  
Link Budget (dB) - 19 dB  
Technology      
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators      
Power Indicator Green : Power LED x 2
Fault Indicator Amber : Indicates unexpected event occurred
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for Link.        Green for PoE power injected
100Base-FX Fiber Port Indicator Green for port Link/Act.
Power      
Redundant Input Power Dual DC power inputs. 50~57VDC on 6-pin terminal block
Power Consumption (Typ.) - 5.65 Watts (P.S.E. not included)  
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Physical Characteristics      
Enclosure IP-30
Dimensions (W x D x H) 26.1 (W) x 94.9 (D) x 144.3 (H)mm (1.03 x 3.74 x 5.68 inch)
Weight (g) - 395 g  
Environmental      
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals      
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1,
       
Warranty 5 years

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.