The EKI-5624P-AE support PoE on Ports 1 ~ 4 and are classified as power source equipment. They are the world’s first convergence switches for process control and IT networking management. This series use Modbus/TCP to communicate with SCADA software and SNMP to communicate with NMS simultaneously, thereby allowing full read control over devices for either control engineers or for IT personnel. The switches come with port-based QoS for deterministic data transmission, enabling specific ports to prioritize traffic and delay less important data over the remaining ports. The switches use the highest quality components and can operate at temperatures of -40 ~ 75°C while also possessing EMS Level 3 protection against electromagnetic interference. The switches comply with E-mark for in-vehicle applications and surveillance systems.
Communications |
Standard |
IEEE 802.3af/at, 802.3, 802.3u, 802.3ab, 802.3az, 802.3x, 802.1p |
LAN |
10/100BASE-TX, 10/100/1000BASE-TX |
Transmission Distance |
Up to 100 m |
Transmission Speed Ethernet |
Up to 1000 Mbps |
Interface |
Connectors |
4 x 10/100BASE-TX with PoE +
2 x 10/100/1000BASE-TX
6-pin removable screw terminal (power & relay) |
LED Indicators |
System LED |
P1, P2, P-Fail, Loop, PoE |
Port LED status 1 |
10/100BASE-TX or 10/100/1000BASE-TX: LNK/ACT, Speed, PoE port |
Physical |
Enclosure |
Metal / Aluminum Shell with solid mounting kits |
Protection Class |
IP 30 |
Installation |
DIN-Rail and Wall-Mount |
Dimensions (W x H x D) |
74 x 152 x 105 mm (2.913 x 5.984 x 4.137) inch |
Environment |
Operating Temperature |
Wide Temp Models: -40 to 75°C (-40 to 167°F)
Standard Models: -25 to 60°C (-4 to 140°F) |
Storage Temperature |
-40 ~ 85°C (-40 ~ 185°F) |
Relative Humidity |
10 ~ 95% (non-condensing) |
Switch Properties |
MAC Address |
2K entries |
Packet Buffer |
-40 ~ 85°C (-40 ~ 185°F) |
Switching Capacity |
4.8 Gbps |
Power |
Power Consumption |
4.2w (System) |
Power Input |
12-24 Vdc, (7A-3A) |
Power Budget |
60w @ 24v
50w @ 12v |
Certification |
EMI |
EN 55011/ 55022 Class A, EN 61000-6-4,
FCC Part 15 Subpart B Class A |
Safety |
IEC/EN 60950, UL61010-2-201, e-Mark Comply with
*Class 1 Division 2, * IECEx, *ATEX |
EMC |
CE, FCC, e-Mark |
EMS |
EN 55024/ EN 61000-6-2
EN 61000-4-2 (ESD) Level 3
EN 61000-4-3 (RS) Level 3;
EN 61000-4-4 (EFT) Level 3
EN 61000-4-5 (Surge) Level 3;
EN 61000-4-6 (CS) Level 3
EN 61000-4-8 (Magnetic Field) Level 3 |
Shock |
IEC 60068-2-27 |
Freefall |
IEC 60068-2-32 |
Vibration |
IEC 60068-2-6 |
|
