Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
IGPS-1080-24V - Slim Type 8 x 10/100/1000TX (RJ-45) PoE+ by ORing Industrial Networking

IGPS-1080-24V - Slim Type 8 x 10/100/1000TX (RJ-45) PoE+
by ORing Industrial Networking

Write a review Write a review
  • IGPS-1080-24V provides 8x10/100/1000Base-T(X) PoE (P.S.E.) ports
  • Supports IEEE 802.3at compliant PoE and total power budget is 120 Watts with maximum 30 Watts per port
  • Supports dual wide range 24~36VDC power inputs for power redundancy
  • Supports Jumbo frame up to 9KBytes
  • Supports auto-negotiation and auto-MDI/MDI-X
  • Supports store and forward transmission
  • Supports flow control
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled
Mfg SKU # : IGPS-1080-24V
Our Price : $559.00
Stock : Call for Availability
Quantity :
IGPS-1080-24V is the unmanaged Gigabit PoE Ethernet switch with P.S.E. function and relay output of 24VDC at 1A. IGPS-1080-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080-24V supports wide-range 24~36VDC power inputs and generates 50VDC P.S.E. power output per port. IGPS-1080-24V PoE switch has 8 x 10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports  
10/100/1000Base-T(X) Ports in RJ45 With P.S.E. 8
Technology  
Ethernet Standards IEEE 802.3 for 10Base-T, 
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators  
Power Indicator  Green : Power LED x 2
Fault Indicator  Amber : Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port and PoE indicator Green for port Link/Act. 
Green for PoE power injected.
Fault contact  
Relay Relay output to carry capacity of 1A at 24VDC
DIP-Switch  

DIP-Switch 1

Power-1 failed warning : (ON) enable, (OFF) disable

DIP-Switch 2

Power-2 failed warning : (ON) enable, (OFF) disable
Power  

Redundant Input power

Dual DC inputs. 24~36VDC on 6-pin terminal block.

Power consumption (Typ.)

7.8 Watts

Overload current protection

Present

Reverse polarity protection

NOT Present

Physical Characteristic  

Enclosure

IP-30

Dimension (W x D x H)

41(W) x 94.9(D) x 144.3(H) mm

Weight (g)

452 g

Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.