Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
IGPS-1080A - Slim Type 8 x 10/100/1000TX (RJ-45) PoE+ by ORing Industrial Networking

IGPS-1080A - Slim Type 8 x 10/100/1000TX (RJ-45) PoE+
by ORing Industrial Networking

Write a review Write a review
  • Provides 8x10/100/1000Base-T(X) PoE (P.S.E.) ports
  • Supports P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled
  • Supports Jumbo frame up to 9KBytes
  • Supports wide temperature -40~70 degree for harsh environment
  • Supports 50~57VDC redundant power input and reply output

IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080A switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

IGPS-1080A can be used in connecting several PoE P.D. Ethernet devices like IP-Camera or other Ethernet devices. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation.

Physical Ports  
10/100/1000Base-T(X) Ports in RJ45 With P.S.E. 8
Technology  
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX 
IEEE 802.3ab for 1000Base-T 
IEEE 802.3x for Flow control 
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators  
Power Indicator  Green : Power LED x 2
Fault Indicator  Amber : Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator Green for port Link/Act. 
Green for PoE power injected.
Fault contact  
Relay Relay output to carry capacity of 1A at 24VDC
DIP-Switch  
DIP-Switch 1 Power-1 failed warning : (ON) enable, (OFF) disable
DIP-Switch 2 Power-2 failed warning : (ON) enable, (OFF) disable
Power  
Redundant Input power Dual DC inputs. 50VDC on 6-pin terminal block.
Power consumption (Typ. 8 Watts (power device not included)
Overload current protection Present
Reverse polarity protection NOT Present
Physical Characteristic  
Enclosure IP-30
Dimension (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm

Weight (g)

390 g
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.