TP-SW5G-24HP - 5 port High Power (140W Total) PoE 10/100/1000BASET switch. IEEE 802.3at/af 48V PoE Out, 11-36VDC In, No Fan by Tycon Systems

TP-SW5G-24HP - 5 POE 10/100/1000 BASET Switch

af 48V PoE Out, 11-36VDC In, No Fan
by Tycon Systems

High Power 10/100 and 1000Mb (“G”) PoE Switch
Remotely Power Equipment thru CAT5 Cable up to 100m
Up to 2A per Port
Built-in Surge Protection
Automatic MDI/MDI-X Crossover
Automatic Speed and Duplex Sensing
Compact Size
High Temperature Operation
CE and FCC Certification

Description
Specification
Datasheet

The TP-SW5G-24HP Power Over Ethernet (PoE) 10/100/1000Mb switch offered by Tycon Power Systems is a fully automatic high speed 5 port Ethernet switch with up to 35 Watts of PoE power per port. It complies with the IEEE802.3af/at specifications for valid PoE device detection. It accepts 12-36VDC power on the wire terminal input and supplies power on 4 ports with 802.3at PoE output. Maximum output power for all ports is 140W with 24V input and 70W with 12V input.

The unit supplies power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device.

The switch accepts DC power from a user supplied 10-36VDC power source. There are 2 power inputs for attachment of primary and backup power sources.

The switch also accepts PoE power via the 802.3af/at uplink port (90W Max).
Metal Housing, No Fan

Ethernet Standard	IEEE802.3/IEEE802.3u
Ports	1 data/PoE input and 4 data/PoE, automatic crossover and polarity
Transmission Speed	1000Mbps / 100 Mbps /10 Mbps Auto-negotiation
Switch Technology	Store and Forward
Protocol	CSMA/CD
Flow Control	IEEE802.3x(full-duplex), Back Pressure(half-duplex)
Data Transmission Rate	1488000pps for 1000baseT, 148800pps for 100baseT, 14880pps for 10baseT
Address Table	1K MAC, self-learning
Connections	Shielded RJ45
POE Output Ports	Port 1-4, auto power management Pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8)
Maximum POE Power	Up to 35W per port; max 70W Total per switch HP with 24V Input 140W Total HP with 12V Input 70W Total
POE Auto Detection	IEEE 802.3af, 802.3at
POE Protection	Over Temperature, Over Current, Over/Under Voltage
Data Surge Protection	IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ns) IEC61000-4-5 (Lightning) 20A (8/20μs)
LED’s	Link (Green On), Activity (Green Blinking ); PoE Detect (Yellow On), PoE Detect Error (Yellow Blinking) Power On (Green On), Power On Alarm (Red On)
DC Power Input	24VDC (12V to 36V), Dual DC Inputs, Reverse Polarity Protected. Also Accepts PoE power input on Port 5
Self Consumption	< 4 Watts
Operating Temp	-40 to +70°C (-40 to 158°F)
Operating Humidity (RH)	5% - 90% (non condensing)
Storage Temperature	-55 to +85°C (-67 to +185°F)
Dimensions (LxWxH)	159 x 118 x 40mm (6.3 x 4.6 x 1.6”) (HP version has metal housing)
Weight	383g (13.5oz)