|
|
EDR-8010-VPN-2GSFP-CT - 8 FE copper and 2 GbE SFP multiport industrial secure router with firewall/NAT/VPN, 12/24/48 VDC input v by MOXA
|
|
|
EDR-8010-VPN-2GSFP-CT_SUMMARY.html
- Industrial-grade Intrusion Prevention/Detection System (IPS/IDS)
- 8 FE+2 Gigabit port all-in-one firewall/NAT/VPN/router/switch
- Visualize OT security with the MXsecurity management software
- Secure remote access tunnel with VPN
- Examine industrial protocol data with Deep Packet Inspection (DPI) technology
- Easy network setup with Network Address Translation (NAT)
- RSTP/Turbo Ring redundant protocol enhances network redundancy
- Developed according to IEC 62443-4-2 with Secure Boot
- -40 to 75C operating temperature range (-T model)
|
|
|
EDR-8010-VPN-2GSFP-CT_DESCRIPTION.html
EDR-8010-VPN-2GSFP-CT - The EDR-8010 Series is a set of
highly integrated industrial multi-port secure routers with firewall/NAT/VPN
and managed Layer 2 switch functions. These devices are designed
for Ethernet-based security applications in critical remote control
or monitoring networks. These secure routers provide an electronic
security perimeter to protect critical cyber assets including substations
in power applications, pump-and-treat systems in water stations, distributed
control systems in oil and gas applications, and PLC/SCADA systems
in factory automation.
EDR-8010-VPN-2GSFP-CT.html
Input/Output Interface -
Alarm Contact Channels - Resistive load: 1 A @ 24 VDC
-
Buttons -
Digital Input Channels - +13 to +30 V for state 1
-30 to +3 V for state 0 Max. input current: 8 mA Ethernet Interface -
10/100BaseT(X) Ports (RJ45 connector) -
1000BaseSFP Slots -
Standards - IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) IEEE 802.3z for 1000BaseSX/LX/LHX/ZX IEEE 802.3x for flow control IEEE 802.1Q for VLAN Tagging IEEE 802.1X for authentication Static Port Trunk -
DMZ - User-configurable DMZ ports
Ethernet Software Features -
Broadcast Forwarding - IP directed broadcast, broadcast forwarding
-
Management - Back Pressure Flow Control
DDNS DHCP Server/Client Web Console (HTTP/HTTPS) LLDP QoS/CoS/ToS SNMPv1/v2c/v3 Telnet TFTP HTTPS SSH -
Redundancy Protocols -
Routing Throughput - Max. 50K packets per second / 500 Mbps (based on RFC 2544)
-
Routing Table -
Concurrent Connections - Max. 120K (based on RFC 3511)
-
Connections Per Second - Max. Max. 6K (based on RFC 3511)
-
Routing Redundancy -
Security - Secure Boot
IPsec L2TP (server) RADIUS Trust access control -
Time Management -
Unicast Routing - OSPF
RIPV1/V2 Static Route -
Multicast Routing -
Filter Switch Properties -
VLAN ID Range -
IGMP Groups -
Max. No. of VLANs LED Interface -
LED Indicators - PWR1, PWR2, STATE, MSTR/H.TC, CPLR/T.TC, VRRP/HA, VPN, USB
DoS and DDoS Protection -
Technology - ARP-Flood
FIN Scan ICMP-Death NEWWithout-SYN Scan NMAP-ID Scan NMAP-Xmas Scan Null Scan SYN/FIN Scan SYN/RST Scan SYN-Flood Xmas Scan Firewall -
Filter - DDoS
Ethernet protocols ICMP IP address MAC address Ports -
Stateful Inspection - Router firewall
Transparent (bridge) firewall -
Deep Packet Inspection - Modbus TCP
Modbus UDP DNP3 IEC 60870-5-104 IEC 61850 MMS EtherNet/IP Omron FINS Siemens S7 Comm. Additional protocols will be supported through future firmware updates. -
Intrusion Prevention System - Requires an additional license.
-
Throughput - Firewall:
Max. 50K packets per second / 500 Mbps (based on RFC 2544) IPsec VPN -
Authentication - MD5 and SHA (SHA-256)
RSA (key size: 1024-bit, 2048-bit) X.509 v3 certificate -
Concurrent VPN Tunnels - Max. 50 IPsec VPN tunnels
-
Encryption - DES
3DES AES-128 AES-192 AES-256 -
Protocols - IPsec
L2TP (server) PPTP (client) -
Throughput - Conditions: AES-256, SHA-256
Max. 25K packets per second / 200 Mbps (based on RFC 2544) NAT -
Features - 1-to-1
N-to-1 Port forwarding NAT loopback Real-Time Firewall / VPN Event Log -
Event Type -
Media - Local storage
SNMP Trap Syslog server Serial Interface -
Console Port - RS-232 (TxD, RxD, GND), 3-pin (115200, n, 8, 1)
-
Connector Power Parameters -
Connection -
Operating Voltage -
Input Voltage - 12/24/48 VDC, redundant dual inputs (DNV-certified for 24 VDC)
-
Input Current - 0.53 A @ 12 VDC
0.26 A @ 24 VDC 0.14 A @ 48 VDC -
Reverse Polarity Protection Physical Characteristics -
Housing -
Dimensions - 45 x 135 x 105 mm (1.77 x 5.31 x 4.13 in)
-
Weight -
Installation - DIN-rail mounting (DNV-certified)
Wall mounting (with optional kit) Environmental Limits -
Operating Temperature -
Storage Temperature (package included) -
Ambient Relative Humidity - 5 to 95% (non-condensing)
Standards and Certifications -
Safety -
EMC -
EMI - CISPR 32, FCC Part 15B Class A
-
EMS - IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF -
Railway -
Traffic Control -
Maritime -
Shock -
Freefall -
Vibration -
Power Substation - IEC 61850-3 Edition 2.0
IEEE 1613 -
Hazardous Locations - ATEX
Class I Division 2 IECEx MTBF
|
|