NS-206FCS - 4 Port 10/100 Base RJ 45 with 2 Port Fiber Optic, SC Connector, Single-Mode, Plastic Case
by ICP DAS

The NS-206FCS (SC Connector; Single-mode) is an unmanaged, 4-Port Industrial 10/100 Base-T(X) with Dual 100 Base-FX Switch that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It uses Ethernet for transmitting a signal up to 15Km, and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion. The NS-206FCS operates at full duplex mode. In full duplex mode, range is 15km with 8.3/125, 8.7/125, 9/125 or 10/125 μm fiber cables. The NS-206FCS can extend your LAN in a daisy chain configuration. Please refer to Hardware. The Ethernet supports 10/ 100M auto-negotiation feature and auto MDI /MDIX function.

• Automatic MDI / MDI-X crossover for plug-and-play
• Each port supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 1.6 Gbps high performance memory bandwidth
• Frame buffer memory : 256 Kbit
• Integrated look-up engine with dedicated 1 K unicast MAC addresses.
• Supports +10 ~ +30Vdc voltage
• Supports operating temperatures from 0°C ~ +70°C
• DIN rail mount for industrial usage

• Compatibility : IEEE 802.3, IEEE802.3u, IEEE802.3x
• Interface : 10/100 Base-T(X) and 100 Base-FX(SC Connector; Single-mode)
• Ethernet Port : 10/100 Mbps x 4
• Fiber Optic Port : 100 Mbps x 2
• Provides LEDs for network and power monitoring
• ESD Protection :
  • 8 KV Contact Discharge
  • 15KV Air-Gap Discharge
• Fiber Optic Transmission distance :
  • Single mode fiber cables : 8.3/125, 8.7/125, 9/125 or 10/125 μm.
  • Distance : 15 km, 1300 nm (9/125 μm)
  • Min. TX Output : -15 dBm
  • Max. TX Output : -8 dBm
  • Sensitivity : -36 to -31 dBm
• Ethernet Cables :
  • 10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.)
  • 100 Base-TX (Cat.5 UTP cable; 100m Max.)
• General Environment:
  • Operating temperature : 0°C ~ +70°C
  • Storage Temperature : -20°C ~ +85°C
  • Relative Humidity : 10% to 90% non-condensing
• Dimensions : 64mm x 110mm x 106mm (W x H x D)
• Power requirements : +10 to 30Vdc (Removable Terminal Block)
• Power consumption : 0.24A@24Vdc (± 5%, arrowed)